library IEEE;
use IEEE.std_logic_1164.all;

entity sqrt8 is
  port ( P : in  std_logic_vector(7 downto 0);
         U : out std_logic_vector(3 downto 0));
end sqrt8;

architecture circuits of sqrt8 is

component Sm   -- subtractor multiplexor 
  port ( x  : in  std_logic;
         y  : in  std_logic;
         b  : in  std_logic;
         u  : in  std_logic;
         d  : out std_logic;
         bo : out std_logic);
end component;

  signal zer : std_logic := '0';
  signal one : std_logic := '1';
  signal x00, XX01, x02, x03, x04, x05, u_0 : std_logic;  
  signal b00, b01, b02, b03, b04, b05 : std_logic;  
  signal x12, x13, x14, x15, x16, u_1 : std_logic;  
  signal b12, b13, b14, b15, b16 : std_logic;  
  signal x24, x25, x26, x27, u_2 : std_logic;  
  signal b24, b25, b26, b27 : std_logic;  
  signal x36, x37, u_3 : std_logic;  
  signal b36, b37 : std_logic;  
begin  -- circuits of sqrt8
  --                           x     y    b    u    d    bo
  s36: Sm port map(P(6), one, zer, u_3, x36, b36);
  s37: Sm port map(P(7), zer, b36, u_3, x37, b37);

  s24: Sm port map(P(4), one, zer, u_2, x24, b24);
  s25: Sm port map(P(5), zer, b24, u_2, x25, b25);
  s26: Sm port map(x36 , u_3, b25, u_2, x26, b26);
  s27: Sm port map(x37 , zer, b26, zer, x27, b27);

  s12: Sm port map(P(2), one, zer, u_1, x12, b12);
  s13: Sm port map(P(3), zer, b12, u_1, x13, b13);
  s14: Sm port map(x24 , u_2, b13, u_1, x14, b14);
  s15: Sm port map(x25 , u_3, b14, u_1, x15, b15);
  s16: Sm port map(x26 , zer, b15, zer, x16, b16);

  s00: Sm port map(P(0), one, zer, zer, x00, b00);
  s01: Sm port map(P(1), zer, b00, zer, XX01, b01);
  s02: Sm port map(x12 , u_1, b01, zer, x02, b02);
  s03: Sm port map(x13 , u_2, b02, zer, x03, b03);
  s04: Sm port map(x14 , u_3, b03, zer, x04, b04);
  s05: Sm port map(x15 , zer, b04, zer, x05, b05);
  u_0  <= not b05;
  u_1  <= not b16;
  u_2  <= not b27;
  u_3  <= not b37;
  U(0) <= u_0;
  U(1) <= u_1;
  U(2) <= u_2;
  U(3) <= u_3;
end circuits;  -- of sqrt8