@ libgcc1 routines for ARM cpu.
@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
/* Copyright (C) 1995, 1996, 1998 Free Software Foundation, Inc.
This file is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the
Free Software Foundation; either version 2, or (at your option) any
later version.
In addition to the permissions in the GNU General Public License, the
Free Software Foundation gives you unlimited permission to link the
compiled version of this file with other programs, and to distribute
those programs without any restriction coming from the use of this
file. (The General Public License restrictions do apply in other
respects; for example, they cover modification of the file, and
distribution when not linked into another program.)
This file is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
/* As a special exception, if you link this library with other files,
some of which are compiled with GCC, to produce an executable,
this library does not by itself cause the resulting executable
to be covered by the GNU General Public License.
This exception does not however invalidate any other reasons why
the executable file might be covered by the GNU General Public License. */
#ifdef __APCS_26__
#define RET movs
#define RETc(x) mov##x##s
#define RETCOND ^
#else
#define RET mov
#define RETc(x) mov##x
#define RETCOND
#endif
#ifndef __USER_LABEL_PREFIX__
#error __USER_LABEL_PREFIX__ not defined
#endif
/* ANSI concatenation macros. */
#define CONCAT1(a, b) CONCAT2(a, b)
#define CONCAT2(a, b) a ## b
/* Use the right prefix for global labels. */
#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)
#ifdef __ELF__
#define __PLT__ (PLT)
#define TYPE(x) .type SYM(x),function
#define SIZE(x) .size SYM(x), . - SYM(x)
#else
#define __PLT__
#define TYPE(x)
#define SIZE(x)
#endif
#ifdef L_udivsi3
dividend .req r0
divisor .req r1
result .req r2
curbit .req r3
ip .req r12
sp .req r13
lr .req r14
pc .req r15
.text
.globl SYM (__udivsi3)
TYPE (__udivsi3)
.align 0
SYM (__udivsi3):
cmp divisor, #0
beq Ldiv0
mov curbit, #1
mov result, #0
cmp dividend, divisor
bcc Lgot_result
Loop1:
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
cmp divisor, #0x10000000
cmpcc divisor, dividend
movcc divisor, divisor, lsl #4
movcc curbit, curbit, lsl #4
bcc Loop1
Lbignum:
@ For very big divisors, we must shift it a bit at a time, or
@ we will be in danger of overflowing.
cmp divisor, #0x80000000
cmpcc divisor, dividend
movcc divisor, divisor, lsl #1
movcc curbit, curbit, lsl #1
bcc Lbignum
Loop3:
@ Test for possible subtractions, and note which bits
@ are done in the result. On the final pass, this may subtract
@ too much from the dividend, but the result will be ok, since the
@ "bit" will have been shifted out at the bottom.
cmp dividend, divisor
subcs dividend, dividend, divisor
orrcs result, result, curbit
cmp dividend, divisor, lsr #1
subcs dividend, dividend, divisor, lsr #1
orrcs result, result, curbit, lsr #1
cmp dividend, divisor, lsr #2
subcs dividend, dividend, divisor, lsr #2
orrcs result, result, curbit, lsr #2
cmp dividend, divisor, lsr #3
subcs dividend, dividend, divisor, lsr #3
orrcs result, result, curbit, lsr #3
cmp dividend, #0 @ Early termination?
movnes curbit, curbit, lsr #4 @ No, any more bits to do?
movne divisor, divisor, lsr #4
bne Loop3
Lgot_result:
mov r0, result
RET pc, lr
Ldiv0:
str lr, [sp, #-4]!
bl SYM (__div0) __PLT__
mov r0, #0 @ about as wrong as it could be
ldmia sp!, {pc}RETCOND
SIZE (__udivsi3)
#endif /* L_udivsi3 */
#ifdef L_umodsi3
dividend .req r0
divisor .req r1
overdone .req r2
curbit .req r3
ip .req r12
sp .req r13
lr .req r14
pc .req r15
.text
.globl SYM (__umodsi3)
TYPE (__umodsi3)
.align 0
SYM (__umodsi3):
cmp divisor, #0
beq Ldiv0
mov curbit, #1
cmp dividend, divisor
RETc(cc) pc, lr
Loop1:
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
cmp divisor, #0x10000000
cmpcc divisor, dividend
movcc divisor, divisor, lsl #4
movcc curbit, curbit, lsl #4
bcc Loop1
Lbignum:
@ For very big divisors, we must shift it a bit at a time, or
@ we will be in danger of overflowing.
cmp divisor, #0x80000000
cmpcc divisor, dividend
movcc divisor, divisor, lsl #1
movcc curbit, curbit, lsl #1
bcc Lbignum
Loop3:
@ Test for possible subtractions. On the final pass, this may
@ subtract too much from the dividend, so keep track of which
@ subtractions are done, we can fix them up afterwards...
mov overdone, #0
cmp dividend, divisor
subcs dividend, dividend, divisor
cmp dividend, divisor, lsr #1
subcs dividend, dividend, divisor, lsr #1
orrcs overdone, overdone, curbit, ror #1
cmp dividend, divisor, lsr #2
subcs dividend, dividend, divisor, lsr #2
orrcs overdone, overdone, curbit, ror #2
cmp dividend, divisor, lsr #3
subcs dividend, dividend, divisor, lsr #3
orrcs overdone, overdone, curbit, ror #3
mov ip, curbit
cmp dividend, #0 @ Early termination?
movnes curbit, curbit, lsr #4 @ No, any more bits to do?
movne divisor, divisor, lsr #4
bne Loop3
@ Any subtractions that we should not have done will be recorded in
@ the top three bits of "overdone". Exactly which were not needed
@ are governed by the position of the bit, stored in ip.
@ If we terminated early, because dividend became zero,
@ then none of the below will match, since the bit in ip will not be
@ in the bottom nibble.
ands overdone, overdone, #0xe0000000
RETc(eq) pc, lr @ No fixups needed
tst overdone, ip, ror #3
addne dividend, dividend, divisor, lsr #3
tst overdone, ip, ror #2
addne dividend, dividend, divisor, lsr #2
tst overdone, ip, ror #1
addne dividend, dividend, divisor, lsr #1
RET pc, lr
Ldiv0:
str lr, [sp, #-4]!
bl SYM (__div0) __PLT__
mov r0, #0 @ about as wrong as it could be
ldmia sp!, {pc}RETCOND
SIZE (__umodsi3)
#endif /* L_umodsi3 */
#ifdef L_divsi3
dividend .req r0
divisor .req r1
result .req r2
curbit .req r3
ip .req r12
sp .req r13
lr .req r14
pc .req r15
.text
.globl SYM (__divsi3)
TYPE (__divsi3)
.align 0
SYM (__divsi3):
eor ip, dividend, divisor @ Save the sign of the result.
mov curbit, #1
mov result, #0
cmp divisor, #0
rsbmi divisor, divisor, #0 @ Loops below use unsigned.
beq Ldiv0
cmp dividend, #0
rsbmi dividend, dividend, #0
cmp dividend, divisor
bcc Lgot_result
Loop1:
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
cmp divisor, #0x10000000
cmpcc divisor, dividend
movcc divisor, divisor, lsl #4
movcc curbit, curbit, lsl #4
bcc Loop1
Lbignum:
@ For very big divisors, we must shift it a bit at a time, or
@ we will be in danger of overflowing.
cmp divisor, #0x80000000
cmpcc divisor, dividend
movcc divisor, divisor, lsl #1
movcc curbit, curbit, lsl #1
bcc Lbignum
Loop3:
@ Test for possible subtractions, and note which bits
@ are done in the result. On the final pass, this may subtract
@ too much from the dividend, but the result will be ok, since the
@ "bit" will have been shifted out at the bottom.
cmp dividend, divisor
subcs dividend, dividend, divisor
orrcs result, result, curbit
cmp dividend, divisor, lsr #1
subcs dividend, dividend, divisor, lsr #1
orrcs result, result, curbit, lsr #1
cmp dividend, divisor, lsr #2
subcs dividend, dividend, divisor, lsr #2
orrcs result, result, curbit, lsr #2
cmp dividend, divisor, lsr #3
subcs dividend, dividend, divisor, lsr #3
orrcs result, result, curbit, lsr #3
cmp dividend, #0 @ Early termination?
movnes curbit, curbit, lsr #4 @ No, any more bits to do?
movne divisor, divisor, lsr #4
bne Loop3
Lgot_result:
mov r0, result
cmp ip, #0
rsbmi r0, r0, #0
RET pc, lr
Ldiv0:
str lr, [sp, #-4]!
bl SYM (__div0) __PLT__
mov r0, #0 @ about as wrong as it could be
ldmia sp!, {pc}RETCOND
SIZE (__divsi3)
#endif /* L_divsi3 */
#ifdef L_modsi3
dividend .req r0
divisor .req r1
overdone .req r2
curbit .req r3
ip .req r12
sp .req r13
lr .req r14
pc .req r15
.text
.globl SYM (__modsi3)
TYPE (__modsi3)
.align 0
SYM (__modsi3):
mov curbit, #1
cmp divisor, #0
rsbmi divisor, divisor, #0 @ Loops below use unsigned.
beq Ldiv0
@ Need to save the sign of the dividend, unfortunately, we need
@ ip later on; this is faster than pushing lr and using that.
str dividend, [sp, #-4]!
cmp dividend, #0
rsbmi dividend, dividend, #0
cmp dividend, divisor
bcc Lgot_result
Loop1:
@ Unless the divisor is very big, shift it up in multiples of
@ four bits, since this is the amount of unwinding in the main
@ division loop. Continue shifting until the divisor is
@ larger than the dividend.
cmp divisor, #0x10000000
cmpcc divisor, dividend
movcc divisor, divisor, lsl #4
movcc curbit, curbit, lsl #4
bcc Loop1
Lbignum:
@ For very big divisors, we must shift it a bit at a time, or
@ we will be in danger of overflowing.
cmp divisor, #0x80000000
cmpcc divisor, dividend
movcc divisor, divisor, lsl #1
movcc curbit, curbit, lsl #1
bcc Lbignum
Loop3:
@ Test for possible subtractions. On the final pass, this may
@ subtract too much from the dividend, so keep track of which
@ subtractions are done, we can fix them up afterwards...
mov overdone, #0
cmp dividend, divisor
subcs dividend, dividend, divisor
cmp dividend, divisor, lsr #1
subcs dividend, dividend, divisor, lsr #1
orrcs overdone, overdone, curbit, ror #1
cmp dividend, divisor, lsr #2
subcs dividend, dividend, divisor, lsr #2
orrcs overdone, overdone, curbit, ror #2
cmp dividend, divisor, lsr #3
subcs dividend, dividend, divisor, lsr #3
orrcs overdone, overdone, curbit, ror #3
mov ip, curbit
cmp dividend, #0 @ Early termination?
movnes curbit, curbit, lsr #4 @ No, any more bits to do?
movne divisor, divisor, lsr #4
bne Loop3
@ Any subtractions that we should not have done will be recorded in
@ the top three bits of "overdone". Exactly which were not needed
@ are governed by the position of the bit, stored in ip.
@ If we terminated early, because dividend became zero,
@ then none of the below will match, since the bit in ip will not be
@ in the bottom nibble.
ands overdone, overdone, #0xe0000000
beq Lgot_result
tst overdone, ip, ror #3
addne dividend, dividend, divisor, lsr #3
tst overdone, ip, ror #2
addne dividend, dividend, divisor, lsr #2
tst overdone, ip, ror #1
addne dividend, dividend, divisor, lsr #1
Lgot_result:
ldr ip, [sp], #4
cmp ip, #0
rsbmi dividend, dividend, #0
RET pc, lr
Ldiv0:
str lr, [sp, #-4]!
bl SYM (__div0) __PLT__
mov r0, #0 @ about as wrong as it could be
ldmia sp!, {pc}RETCOND
SIZE (__modsi3)
#endif /* L_modsi3 */
#ifdef L_dvmd_tls
.globl SYM (__div0)
TYPE (__div0)
.align 0
SYM (__div0):
RET pc, lr
SIZE (__div0)
#endif /* L_divmodsi_tools */
#ifdef L_dvmd_lnx
@ GNU/Linux division-by zero handler. Used in place of L_dvmd_tls
#include <asm/unistd.h>
#define SIGFPE 8 @ cant use <asm/signal.h> as it
@ contains too much C rubbish
.globl SYM (__div0)
TYPE (__div0)
.align 0
SYM (__div0):
stmfd sp!, {r1, lr}
swi __NR_getpid
cmn r0, #1000
ldmhsfd sp!, {r1, pc}RETCOND @ not much we can do
mov r1, #SIGFPE
swi __NR_kill
ldmfd sp!, {r1, pc}RETCOND
SIZE (__div0)
#endif /* L_dvmd_lnx */
/* These next two sections are here despite the fact that they contain Thumb
assembler because their presence allows interworked code to be linked even
when the GCC library is this one. */
#ifdef L_call_via_rX
/* These labels & instructions are used by the Arm/Thumb interworking code.
The address of function to be called is loaded into a register and then
one of these labels is called via a BL instruction. This puts the
return address into the link register with the bottom bit set, and the
code here switches to the correct mode before executing the function. */
.text
.align 0
.code 16
.macro call_via register
.globl SYM (_call_via_\register)
TYPE (_call_via_\register)
.thumb_func
SYM (_call_via_\register):
bx \register
nop
SIZE (_call_via_\register)
.endm
call_via r0
call_via r1
call_via r2
call_via r3
call_via r4
call_via r5
call_via r6
call_via r7
call_via r8
call_via r9
call_via sl
call_via fp
call_via ip
call_via sp
call_via lr
#endif /* L_call_via_rX */
#ifdef L_interwork_call_via_rX
/* These labels & instructions are used by the Arm/Thumb interworking code,
when the target address is in an unknown instruction set. The address
of function to be called is loaded into a register and then one of these
labels is called via a BL instruction. This puts the return address
into the link register with the bottom bit set, and the code here
switches to the correct mode before executing the function. Unfortunately
the target code cannot be relied upon to return via a BX instruction, so
instead we have to store the resturn address on the stack and allow the
called function to return here instead. Upon return we recover the real
return address and use a BX to get back to Thumb mode. */
.text
.align 0
.code 32
.globl _arm_return
_arm_return:
ldmia r13!, {r12}
bx r12
.code 16
.macro interwork register
.code 16
.globl SYM (_interwork_call_via_\register)
TYPE (_interwork_call_via_\register)
.thumb_func
SYM (_interwork_call_via_\register):
bx pc
nop
.code 32
.globl .Lchange_\register
.Lchange_\register:
tst \register, #1
stmeqdb r13!, {lr}
adreq lr, _arm_return
bx \register
SIZE (_interwork_call_via_\register)
.endm
interwork r0
interwork r1
interwork r2
interwork r3
interwork r4
interwork r5
interwork r6
interwork r7
interwork r8
interwork r9
interwork sl
interwork fp
interwork ip
interwork sp
/* The lr case has to be handled a little differently...*/
.code 16
.globl SYM (_interwork_call_via_lr)
TYPE (_interwork_call_via_lr)
.thumb_func
SYM (_interwork_call_via_lr):
bx pc
nop
.code 32
.globl .Lchange_lr
.Lchange_lr:
tst lr, #1
stmeqdb r13!, {lr}
mov ip, lr
adreq lr, _arm_return
bx ip
SIZE (_interwork_call_via_lr)
#endif /* L_interwork_call_via_rX */
syntax highlighted by Code2HTML, v. 0.9.1