| Download M4 Source | Macro History | Category Index |
AX_PATH_MILTER([MINIMUM-VERSION, [ACTION-IF-FOUND [,
ACTION-IF-NOT-FOUND]]])
This macro tries to automatically find the library libmilter.a and the header file "libmilter/mfapi.h", which are required when compiling a milter for Sendmail. When successful, it sets the output variable MILTER_LIBS to "-lmilter", MILTER_LDFLAGS to contain an -Lpathtolib option, and MILTER_CPPFLAGS to contain an -Ipathtoinclude option, if they are necessary.
The easiest way to use this macro is something like:
AX_PATH_MILTER([8.12],[
LIBS="$MILTER_LIBS $LIBS"
LDFLAGS="$MILTER_LDFLAGS $LDFLAGS"
CPPFLAGS="$CPPFLAGS $MILTER_CPPFLAGS"
],[
AC_MSG_ERROR([required milter library and header not found])
])
If the macro is successful, it just adds any flags to the necessary environment. If it is not successful, it would likely be a fatal error, because if an application is linking with libmilter.a, it is probably because it is a milter.
There are two optional "--with" options for configure which are added. If they are specified, they override any searching that is done. They are:
--with-sendmail-base=<DIR> This option is used to explicitly
specify the base of the sendmail distribution.
--with-sendmail-obj=<DIR> The option is used to explicitly specify
the "obj.*" subdirectory in the sendmail distribution
that should be used.
When sendmail-base is not specified, the current environment is first tested to see if the header and library are available, and if so MILTER_LDFLAGS and MILTER_CPPFLAGS are left empty.
There are two places that are searched for the sendmail base directory. The first location is one directory down from the current directory. It checks if there is a directory of the form sendmail-8.1*, limited to version 8.12.x or higher, then chooses the directory with the highest version number. If that method does not succeed, it then looks in the file /etc/mail/sendmail.cf for the directory it was built from, and uses the base of that distribution. If neither of these methods work, then it fails.
There are two methods for finding the "obj.*" directory when it is not specified. The first is to try to run sendmail's Build program with the -M option which will print out the name of the obj. directory for the tool in the directory where it is run from. If this does not work, is looks for the newest directory of the form "obj.*" in the sendmail base directory.
Two addition output variables that are defined, whether or not the files are found are SENDMAIL_BASE_DIR and SENDMAIL_OBJ_DIR, which are the suspected location of the sendmail base directory and obj.* subdirectory.
NOTE: POSIX threads MUST be configured BEFORE this function is called or it will not find libmilter.a even if it exists. The easiest way is to use the ACX_PTHREAD macro by Steven G. Johnson and Alejandro Forero Cuervo which is available from the Autoconf Macro Archive.
Tim Toolan <toolan@ele.uri.edu>
2004-02-21
###############################################################################
AC_DEFUN([AX_PATH_MILTER], [
# Used to indicate success or failure of this function.
ax_path_milter_ok=no
# Convert sections of MINIMUM-VERSION to three digit numbers by adding zeros.
# For example 8.12.9 would become 008.012.009
ac_milter_minimum_version=`echo "$1" | sed 's,\([[0-9]]*\),x\1x,g;s,x\([[0-9]]\)x,x0\1x,g;s,x\([[0-9]][[0-9]]\)x,x0\1x,g;s,x,,g'`
# Add options --with-sendmail-base and --with-sendmail-obj to configure.
AC_ARG_WITH([sendmail-base],
[ --with-sendmail-base=<DIR> base directory of sendmail distribution])
AC_ARG_WITH([sendmail-obj],
[ --with-sendmail-obj=<DIR> obj.* subdirectory in sendmail distribution])
# Check for functions required by libmilter.
AC_CHECK_FUNC(inet_aton, [], [AC_SEARCH_LIBS(inet_aton, [socket nsl resolv])])
AC_CHECK_FUNC(socket, [], [AC_SEARCH_LIBS(socket, [socket nsl])])
AC_CHECK_FUNC(gethostbyname, [], [AC_SEARCH_LIBS(gethostbyname, [socket nsl])])
###############################################################################
#
# If neither --with-sendmail-base or --with-sendmail-obj is specified
# check the existing environment first for mfapi.h and libmilter without
# modifying CPPFLAGS, LDFLAGS, and LIBS first.
#
if test "x$with_sendmail_base$with_sendmail_obj" = "x" ; then
AC_CHECK_HEADER([libmilter/mfapi.h],[
AC_CHECK_LIB([milter],[smfi_main],[
# both tests succeeded so indicate success
ax_path_milter_ok=yes
# add -lmilter to the libraries to link
MILTER_LIBS="-lmilter"
])
])
if test "$ax_path_milter_ok" = "no" ; then
# Unset the cached test results because we will be trying them again later.
ac_milter_tmp=abcdefg
if unset ac_milter_tmp 2> /dev/null ; then
unset ac_cv_header_libmilter_mfapi_h
unset ac_cv_lib_milter_smfi_main
else
AC_MSG_WARN(
[system doesn't have unset so either use --with-sendmail-base
or set LDFLAGS and CPPFLAGS with the necessary -L and -I options])
fi
fi
fi
###############################################################################
#
# If didn't already fine necessary files then search.
#
if test "$ax_path_milter_ok" = "no" ; then
#############################################################################
#
# Determine the sendmail base directory and set SENDMAIL_BASE_DIR.
#
if test "x$with_sendmail_base" != "x" ; then
# set SENDMAIL_BASE_DIR to the one specified by--with-sendmail-base
SENDMAIL_BASE_DIR="$with_sendmail_base"
else
AC_MSG_CHECKING([for sendmail base directory in ../ ])
#
# --with-sendmail-base is not used, so we will try to determine it
#
# 1) List all directories one level down that look like sendmail.
# 2) Select ones that are sendmail 8.12 or higher (including 8.13
# versions when they come out).
# 3) Replace any single digit last version numbers with a two digit
# version number (ie. 8.12.9 becomes 8.12.09).
# 4) Sort all of the directories found in reverse order.
# 5) Take the first one (the highest version).
# 6) Restore the single digit version numbers.
#
ac_milter_tmp=`ls -d ../sendmail-8.1* 2> /dev/null | grep '../sendmail-8.1[[2-9]]' | sed 's,\.\([[0-9]]\)$,.0\1,' | sort -r | sed '1q' | sed 's,\.0\([[0-9]]\)$,.\1,'`
# Convert found version sections to three digit numbers by adding zeros.
ac_milter_found_version=`echo "$ac_milter_tmp" | sed 's,.*/sendmail-,,;s,\([[0-9]]*\),x\1x,g;s,x\([[0-9]]\)x,x0\1x,g;s,x\([[0-9]][[0-9]]\)x,x0\1x,g;s,x,,g'`
# If ac_milter_minimum_version is equal to ac_milter_lower_version, then
# the found version is greater than or equal to the minumum version.
# Pick the version string that is the lesser of the two.
# An empty string would be less than anything.
# In short, ac_milter_version_ok will equal yes if the version is ok,
# and no otherwise.
ac_milter_version_ok=`echo "x$ac_milter_minimum_version
x$ac_milter_found_version" | sort | sed '1q' | sed "s,x${ac_milter_minimum_version},yes,;s,x${ac_milter_found_version},no," `
# If we have something add the current directory to it.
if test "x$ac_milter_tmp" != "x" ; then
ac_milter_tmp="`pwd`/$ac_milter_tmp"
fi
if test -r "${ac_milter_tmp}/include/libmilter/mfapi.h" && \
test "$ac_milter_version_ok" = "yes" ; then
# The file mfapi.h exists so we will use this as SENDMAIL_BASE_DIR.
AC_MSG_RESULT([yes])
SENDMAIL_BASE_DIR="$ac_milter_tmp"
else
AC_MSG_RESULT([no])
AC_MSG_CHECKING([for sendmail base from /etc/mail/sendmail.cf])
#
# The previous method to find SENDMAIL_BASE_DIR failed, so we will
# try this method.
#
# 1) Check for a line in /etc/mail/sendmail.cf of the form:
# ##### in /some/path/sendmail-8.x.x/more/path
# This is the directory that the sendmail.cf file was built in.
# 2) Take the first occurrence if there are more than one.
# 3) Remove the leading "##### in ".
# 4) Remove everything after the sendmail-8.x.x path component.
#
dnl # Note that the following expression only should not use double
dnl # square brackets because for some reason, possibly having to
dnl # do with the pound sign, m4 doesn't convert them to single brackets.
dnl #
ac_milter_tmp=`grep "^##### in /" /etc/mail/sendmail.cf 2> /dev/null | grep "/sendmail-8.1" | sed '1q' | sed 's,^##### in ,,' | sed 's,\(/sendmail-8\.[0-9.]*\).*,\1,'`
# Convert found version sections to three digit numbers by adding zeros.
ac_milter_found_version=`echo "$ac_milter_tmp" | sed 's,.*/sendmail-,,;s,\([[0-9]]*\),x\1x,g;s,x\([[0-9]]\)x,x0\1x,g;s,x\([[0-9]][[0-9]]\)x,x0\1x,g;s,x,,g'`
# ac_milter_version_ok will equal yes if the version is ok, otherwise no.
ac_milter_version_ok=`echo "x$ac_milter_minimum_version
x$ac_milter_found_version" | sort | sed '1q' | sed "s,x${ac_milter_minimum_version},yes,;s,x${ac_milter_found_version},no," `
if test -r "${ac_milter_tmp}/include/libmilter/mfapi.h" && \
test "$ac_milter_version_ok" = "yes" ; then
# The file mfapi.h exists so we will use this as SENDMAIL_BASE_DIR.
AC_MSG_RESULT([yes])
SENDMAIL_BASE_DIR="$ac_milter_tmp"
else
AC_MSG_RESULT([no])
fi
fi
fi
#############################################################################
#
# Determine the sendmail obj.* directory and set SENDMAIL_OBJ_DIR.
# We can only do this if we found SENDMAIL_BASE_DIR.
#
if test "x$SENDMAIL_BASE_DIR" != "x" ; then
if test "x$with_sendmail_obj" != "x" ; then
# set SENDMAIL_OBJ_DIR to the one specified by--with-sendmail-obj
SENDMAIL_OBJ_DIR="$with_sendmail_obj"
else
AC_MSG_CHECKING([for sendmail obj.* subdirectory using Build -M])
#
# --with-sendmail-obj is not used, so we will try to determine it
#
# Try to run sendmail's Build program with the -M option which will
# print out the name of the obj. directory for the tool in the
# directory where it is run from.
#
ac_milter_tmp=`(cd ${SENDMAIL_BASE_DIR}/libmilter 1> /dev/null ; ./Build -M ) 2> /dev/null`
if test -f "${ac_milter_tmp}/libmilter.a" ; then
# libmilter.a exists so this is the one we will choose
AC_MSG_RESULT([yes])
# Remove beginning and end of path from obj.* directory.
SENDMAIL_OBJ_DIR=`echo "$ac_milter_tmp" | sed 's,/libmilter$,,;s,.*/,,'`
else
AC_MSG_RESULT([no])
AC_MSG_CHECKING([for sendmail obj.* subdirectory using ls])
#
# List all directories of the form "obj." in the sendmail base
# directory, and choose the one with the latest modification date.
#
ac_milter_tmp=`ls -dt ${SENDMAIL_BASE_DIR}/obj.*/libmilter 2> /dev/null | sed '1q'`
if test -f "${ac_milter_tmp}/libmilter.a" ; then
# libmilter.a exists so this is the one we will choose
AC_MSG_RESULT([yes])
# Remove beginning and end of path from obj.* directory.
SENDMAIL_OBJ_DIR=`echo "$ac_milter_tmp" | sed 's,/libmilter$,,;s,.*/,,'`
else
AC_MSG_RESULT([no])
fi
fi
fi
fi
#############################################################################
#
# If we have both SENDMAIL_BASE_DIR and SENDMAIL_OBJ_DIR we will check
# for the necessary files.
#
if test "x$SENDMAIL_BASE_DIR" != "x" && \
test "x$SENDMAIL_OBJ_DIR" != "x" ; then
# Save and modify CPPFLAGS.
ac_milter_save_CPPFLAGS="$CPPFLAGS"
MILTER_CPPFLAGS="-I$SENDMAIL_BASE_DIR/include"
CPPFLAGS="$CPPFLAGS $MILTER_CPPFLAGS"
# Save and modify LDFLAGS.
ac_milter_save_LDFLAGS="$LDLFAGS"
MILTER_LDFLAGS="-L${SENDMAIL_BASE_DIR}/${SENDMAIL_OBJ_DIR}/libmilter"
LDFLAGS="$MILTER_LDFLAGS $LDFLAGS"
AC_CHECK_HEADER([libmilter/mfapi.h],[
AC_CHECK_LIB([milter],[smfi_main],[
# both tests succeeded so add -lmilter to the libraries to link
MILTER_LIBS="-lmilter"
# indicate success
ax_path_milter_ok=yes
])
])
# Restore the modified environment
CPPFLAGS="$ac_milter_save_CPPFLAGS"
LDFLAGS="$ac_milter_save_LDFLAGS"
fi
fi
# If failure, clear MILTER_LIBS, MILTER_LDFLAGS and MILTER_CPPFLAGS.
if test "$ax_path_milter_ok" = "no" ; then
MILTER_CPPFLAGS=""
MILTER_LIBS=""
MILTER_LDFLAGS=""
fi
# export these to the make environment
AC_SUBST([MILTER_LIBS])
AC_SUBST([MILTER_CPPFLAGS])
AC_SUBST([MILTER_LDFLAGS])
AC_SUBST([SENDMAIL_BASE_DIR])
AC_SUBST([SENDMAIL_OBJ_DIR])
# Indicate status of checking for libmilter stuff.
AC_MSG_CHECKING([if files required by libmilter are present])
# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND.
if test "$ax_path_milter_ok" = "yes" ; then
AC_MSG_RESULT([yes])
$2
else
AC_MSG_RESULT([no])
$3
fi
])dnl
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
As a special exception, the respective Autoconf Macro's copyright owner gives unlimited permission to copy, distribute and modify the configure scripts that are the output of Autoconf when processing the Macro. You need not follow the terms of the GNU General Public License when using or distributing such scripts, even though portions of the text of the Macro appear in them. The GNU General Public License (GPL) does govern all other use of the material that constitutes the Autoconf Macro.
This special exception to the GPL applies to versions of the Autoconf Macro released by the Autoconf Macro Archive. When you make and distribute a modified version of the Autoconf Macro, you may extend this special exception to the GPL to apply to your modified version as well.