# Makefile.in generated by automake 1.10 from Makefile.am. # lib/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/autoconf-2.61 pkglibdir = $(libdir)/autoconf-2.61 pkgincludedir = $(includedir)/autoconf-2.61 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : subdir = lib DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/m4.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(pkgdatadir)" nodist_pkgdataDATA_INSTALL = $(INSTALL_DATA) DATA = $(nodist_pkgdata_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /usr/ports/devel/autoconf261/work/autoconf-2.61/build-aux/missing --run aclocal-1.10 AMTAR = ${SHELL} /usr/ports/devel/autoconf261/work/autoconf-2.61/build-aux/missing --run tar AUTOCONF = ${SHELL} /usr/ports/devel/autoconf261/work/autoconf-2.61/build-aux/missing --run autoconf AUTOHEADER = ${SHELL} /usr/ports/devel/autoconf261/work/autoconf-2.61/build-aux/missing --run autoheader AUTOMAKE = ${SHELL} /usr/ports/devel/autoconf261/work/autoconf-2.61/build-aux/missing --run automake-1.10 AWK = gawk CYGPATH_W = echo DEFS = -DPACKAGE_NAME=\"GNU\ Autoconf\" -DPACKAGE_TARNAME=\"autoconf\" -DPACKAGE_VERSION=\"2.61\" -DPACKAGE_STRING=\"GNU\ Autoconf\ 2.61\" -DPACKAGE_BUGREPORT=\"bug-autoconf@gnu.org\" -DPACKAGE=\"autoconf\" -DVERSION=\"2.61\" ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E EMACS = emacs EMACSLOADPATH = EXPR = /usr/local/bin/expr GREP = /usr/bin/grep HELP2MAN = ${SHELL} /usr/ports/devel/autoconf261/work/autoconf-2.61/build-aux/missing --run help2man INSTALL = /usr/bin/install -c -o root -g wheel INSTALL_DATA = install -o root -g wheel -m 444 INSTALL_PROGRAM = install -s -o root -g wheel -m 555 INSTALL_SCRIPT = install -o root -g wheel -m 555 INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LIBOBJS = LIBS = LTLIBOBJS = M4 = /usr/local/bin/gm4 M4_DEBUGFILE = --error-output MAKEINFO = ${SHELL} /usr/ports/devel/autoconf261/work/autoconf-2.61/build-aux/missing --run makeinfo MKDIR_P = /usr/local/bin/mkdir -p PACKAGE = autoconf-2.61 PACKAGE_BUGREPORT = bug-autoconf@gnu.org PACKAGE_NAME = GNU Autoconf PACKAGE_STRING = GNU Autoconf 2.61 PACKAGE_TARNAME = autoconf PACKAGE_VERSION = 2.61 PATH_SEPARATOR = : PERL = /usr/local/bin/perl SED = /usr/local/bin/sed SET_MAKE = SHELL = /bin/sh STRIP = TEST_EMACS = emacs VERSION = 2.61 abs_builddir = /usr/ports/devel/autoconf261/work/autoconf-2.61/lib abs_srcdir = /usr/ports/devel/autoconf261/work/autoconf-2.61/lib abs_top_builddir = /usr/ports/devel/autoconf261/work/autoconf-2.61 abs_top_srcdir = /usr/ports/devel/autoconf261/work/autoconf-2.61 ac_cv_sh_n_works = yes am__leading_dot = . am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build_alias = builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host_alias = htmldir = ${docdir} includedir = ${prefix}/include infodir = /usr/local/info/ install_sh = $(SHELL) /usr/ports/devel/autoconf261/work/autoconf-2.61/build-aux/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec lispdir = no localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = /usr/local/man mkdir_p = /usr/local/bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr/local program_transform_name = s&$$&-2.61& psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target_alias = top_builddir = .. top_srcdir = .. SUBDIRS = Autom4te m4sugar autoconf autotest autoscan emacs nodist_pkgdata_DATA = autom4te.cfg EXTRA_DIST = autom4te.in freeze.mk edit = sed \ -e 's|@SHELL[@]|$(SHELL)|g' \ -e 's|@PERL[@]|$(PERL)|g' \ -e 's|@bindir[@]|$(bindir)|g' \ -e 's|@datadir[@]|$(pkgdatadir)|g' \ -e 's|@prefix[@]|$(prefix)|g' \ -e 's|@autoconf-name[@]|'`echo autoconf | sed '$(transform)'`'|g' \ -e 's|@autoheader-name[@]|'`echo autoheader | sed '$(transform)'`'|g' \ -e 's|@autom4te-name[@]|'`echo autom4te | sed '$(transform)'`'|g' \ -e 's|@M4[@]|$(M4)|g' \ -e 's|@AWK[@]|$(AWK)|g' \ -e 's|@VERSION[@]|$(VERSION)|g' \ -e 's|@PACKAGE_NAME[@]|$(PACKAGE_NAME)|g' # All the files below depend on Makefile so that they are rebuilt # when the prefix, etc. changes. Unfortunately, suffix rules # cannot have additional dependencies, so we have to use explicit rules. CLEANFILES = autom4te.cfg all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu lib/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh install-nodist_pkgdataDATA: $(nodist_pkgdata_DATA) @$(NORMAL_INSTALL) test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" @list='$(nodist_pkgdata_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(nodist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \ $(nodist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \ done uninstall-nodist_pkgdataDATA: @$(NORMAL_UNINSTALL) @list='$(nodist_pkgdata_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \ rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(pkgdatadir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-nodist_pkgdataDATA install-dvi: install-dvi-recursive install-exec-am: install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-nodist_pkgdataDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic ctags \ ctags-recursive distclean distclean-generic distclean-tags \ distdir dvi dvi-am html html-am info info-am install \ install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-nodist_pkgdataDATA install-pdf install-pdf-am \ install-ps install-ps-am install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ uninstall-nodist_pkgdataDATA autom4te.cfg: $(srcdir)/autom4te.in Makefile rm -f autom4te.cfg autom4te.tmp $(edit) $(srcdir)/autom4te.in >autom4te.tmp chmod a-w autom4te.tmp mv autom4te.tmp autom4te.cfg # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: