//**** ATMEL AVR - A P P L I C A T I O N   N O T E  ************************
//*
//* Title:		AVR061 - STK500 Communication Protocol
//* Filename:		command.h
//* Version:		1.0
//* Last updated:	09.09.2002
//*
//* Support E-mail:	avr@atmel.com
//*
//**************************************************************************

// *****************[ STK Message constants ]***************************

#define STK_SIGN_ON_MESSAGE "AVR STK"   // Sign on string for Cmnd_STK_GET_SIGN_ON

// *****************[ STK Response constants ]***************************

#define Resp_STK_OK                0x10  // ' '
#define Resp_STK_FAILED            0x11  // ' '
#define Resp_STK_UNKNOWN           0x12  // ' '
#define Resp_STK_NODEVICE          0x13  // ' '
#define Resp_STK_INSYNC            0x14  // ' '
#define Resp_STK_NOSYNC            0x15  // ' '

#define Resp_ADC_CHANNEL_ERROR     0x16  // ' '
#define Resp_ADC_MEASURE_OK        0x17  // ' '
#define Resp_PWM_CHANNEL_ERROR     0x18  // ' '
#define Resp_PWM_ADJUST_OK         0x19  // ' '

// *****************[ STK Special constants ]***************************

#define Sync_CRC_EOP               0x20  // 'SPACE'

// *****************[ STK Command constants ]***************************

#define Cmnd_STK_GET_SYNC          0x30  // ' '
#define Cmnd_STK_GET_SIGN_ON       0x31  // ' '

#define Cmnd_STK_SET_PARAMETER     0x40  // ' '
#define Cmnd_STK_GET_PARAMETER     0x41  // ' '
#define Cmnd_STK_SET_DEVICE        0x42  // ' '
#define Cmnd_STK_SET_DEVICE_EXT    0x45  // ' '			

#define Cmnd_STK_ENTER_PROGMODE    0x50  // ' '
#define Cmnd_STK_LEAVE_PROGMODE    0x51  // ' '
#define Cmnd_STK_CHIP_ERASE        0x52  // ' '
#define Cmnd_STK_CHECK_AUTOINC     0x53  // ' '
#define Cmnd_STK_LOAD_ADDRESS      0x55  // ' '
#define Cmnd_STK_UNIVERSAL         0x56  // ' '
#define Cmnd_STK_UNIVERSAL_MULTI   0x57  // ' '

#define Cmnd_STK_PROG_FLASH        0x60  // ' '
#define Cmnd_STK_PROG_DATA         0x61  // ' '
#define Cmnd_STK_PROG_FUSE         0x62  // ' '
#define Cmnd_STK_PROG_LOCK         0x63  // ' '
#define Cmnd_STK_PROG_PAGE         0x64  // ' '
#define Cmnd_STK_PROG_FUSE_EXT     0x65  // ' '		

#define Cmnd_STK_READ_FLASH        0x70  // ' '
#define Cmnd_STK_READ_DATA         0x71  // ' '
#define Cmnd_STK_READ_FUSE         0x72  // ' '
#define Cmnd_STK_READ_LOCK         0x73  // ' '
#define Cmnd_STK_READ_PAGE         0x74  // ' '
#define Cmnd_STK_READ_SIGN         0x75  // ' '
#define Cmnd_STK_READ_OSCCAL       0x76  // ' '
#define Cmnd_STK_READ_FUSE_EXT     0x77  // ' '		
#define Cmnd_STK_READ_OSCCAL_EXT   0x78  // ' '     

// *****************[ STK Parameter constants ]***************************

#define Parm_STK_HW_VER            0x80  // ' ' - R
#define Parm_STK_SW_MAJOR          0x81  // ' ' - R
#define Parm_STK_SW_MINOR          0x82  // ' ' - R
#define Parm_STK_LEDS              0x83  // ' ' - R/W
#define Parm_STK_VTARGET           0x84  // ' ' - R/W
#define Parm_STK_VADJUST           0x85  // ' ' - R/W
#define Parm_STK_OSC_PSCALE        0x86  // ' ' - R/W
#define Parm_STK_OSC_CMATCH        0x87  // ' ' - R/W
#define Parm_STK_RESET_DURATION    0x88  // ' ' - R/W
#define Parm_STK_SCK_DURATION      0x89  // ' ' - R/W

#define Parm_STK_BUFSIZEL          0x90  // ' ' - R/W, Range {0..255}
#define Parm_STK_BUFSIZEH          0x91  // ' ' - R/W, Range {0..255}
#define Parm_STK_DEVICE            0x92  // ' ' - R/W, Range {0..255}
#define Parm_STK_PROGMODE          0x93  // ' ' - 'P' or 'S'
#define Parm_STK_PARAMODE          0x94  // ' ' - TRUE or FALSE
#define Parm_STK_POLLING           0x95  // ' ' - TRUE or FALSE
#define Parm_STK_SELFTIMED         0x96  // ' ' - TRUE or FALSE
#define Param_STK500_TOPCARD_DETECT 0x98  // ' ' - Detect top-card attached

// *****************[ STK status bit definitions ]***************************

#define Stat_STK_INSYNC            0x01  // INSYNC status bit, '1' - INSYNC
#define Stat_STK_PROGMODE          0x02  // Programming mode,  '1' - PROGMODE
#define Stat_STK_STANDALONE        0x04  // Standalone mode,   '1' - SM mode
#define Stat_STK_RESET             0x08  // RESET button,      '1' - Pushed
#define Stat_STK_PROGRAM           0x10  // Program button, '   1' - Pushed
#define Stat_STK_LEDG              0x20  // Green LED status,  '1' - Lit
#define Stat_STK_LEDR              0x40  // Red LED status,    '1' - Lit
#define Stat_STK_LEDBLINK          0x80  // LED blink ON/OFF,  '1' - Blink


// *****************************[ End Of COMMAND.H ]**************************