# Makefile.in generated by automake 1.9.6 from Makefile.am. # @configure_input@ # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. @SET_MAKE@ # -*- mode: makefile -*- #################################### # Everything below here is generic # #################################### srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = ../.. am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = @build@ host_triplet = @host@ DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ $(top_srcdir)/gtk-doc.make subdir = doc/api ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-exec-recursive install-info-recursive \ install-recursive installcheck-recursive installdirs-recursive \ pdf-recursive ps-recursive uninstall-info-recursive \ uninstall-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = @ACLOCAL@ ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@ ALL_LINGUAS = @ALL_LINGUAS@ AMDEP_FALSE = @AMDEP_FALSE@ AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ AR = @AR@ AS = @AS@ AUTOCONF = @AUTOCONF@ AUTOHEADER = @AUTOHEADER@ AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ BONOBO_ACTIVATION_LT_VERSION_INFO = @BONOBO_ACTIVATION_LT_VERSION_INFO@ BONOBO_MAJOR_VERSION = @BONOBO_MAJOR_VERSION@ BONOBO_MICRO_VERSION = @BONOBO_MICRO_VERSION@ BONOBO_MINOR_VERSION = @BONOBO_MINOR_VERSION@ BONOBO_SLAY = @BONOBO_SLAY@ CATALOGS = @CATALOGS@ CATOBJEXT = @CATOBJEXT@ CC = @CC@ CCDEPMODE = @CCDEPMODE@ CFLAGS = @CFLAGS@ CPP = @CPP@ CPPFLAGS = @CPPFLAGS@ CXX = @CXX@ CXXCPP = @CXXCPP@ CXXDEPMODE = @CXXDEPMODE@ CXXFLAGS = @CXXFLAGS@ CYGPATH_W = @CYGPATH_W@ DATADIRNAME = @DATADIRNAME@ DEFS = @DEFS@ DEPDIR = @DEPDIR@ DLLTOOL = @DLLTOOL@ ECHO = @ECHO@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ EGREP = @EGREP@ ENABLE_GTK_DOC_FALSE = @ENABLE_GTK_DOC_FALSE@ ENABLE_GTK_DOC_TRUE = @ENABLE_GTK_DOC_TRUE@ EXEEXT = @EXEEXT@ F77 = @F77@ FFLAGS = @FFLAGS@ GETTEXT_PACKAGE = @GETTEXT_PACKAGE@ GLIB_GENMARSHAL = @GLIB_GENMARSHAL@ GMOFILES = @GMOFILES@ GMSGFMT = @GMSGFMT@ GREP = @GREP@ GTHREAD_CFLAGS = @GTHREAD_CFLAGS@ GTHREAD_LIBS = @GTHREAD_LIBS@ GTK_DOC_USE_LIBTOOL_FALSE = @GTK_DOC_USE_LIBTOOL_FALSE@ GTK_DOC_USE_LIBTOOL_TRUE = @GTK_DOC_USE_LIBTOOL_TRUE@ HTML_DIR = @HTML_DIR@ IF_BSD_PS = @IF_BSD_PS@ IF_CYGWIN_PS = @IF_CYGWIN_PS@ IF_POSIX_PS = @IF_POSIX_PS@ INSTALL_DATA = @INSTALL_DATA@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ INSTOBJEXT = @INSTOBJEXT@ INTLLIBS = @INTLLIBS@ INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@ INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@ INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@ INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@ INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@ INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@ INTLTOOL_MERGE = @INTLTOOL_MERGE@ INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@ INTLTOOL_PERL = @INTLTOOL_PERL@ INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@ INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@ INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@ INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@ INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@ INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@ INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@ INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@ INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@ INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@ INTLTOOL_UPDATE = @INTLTOOL_UPDATE@ INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@ INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@ INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@ LDFLAGS = @LDFLAGS@ LEX = @LEX@ LEXLIB = @LEXLIB@ LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ LFLAGS = @LFLAGS@ LIBBONOBO_CFLAGS = @LIBBONOBO_CFLAGS@ LIBBONOBO_LIBS = @LIBBONOBO_LIBS@ LIBBONOBO_LT_VERSION_INFO = @LIBBONOBO_LT_VERSION_INFO@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ LIBTOOL = @LIBTOOL@ LN_S = @LN_S@ LTLIBOBJS = @LTLIBOBJS@ MAINT = @MAINT@ MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ MAKEINFO = @MAKEINFO@ MKINSTALLDIRS = @MKINSTALLDIRS@ MSGFMT = @MSGFMT@ MSGFMT_OPTS = @MSGFMT_OPTS@ MSGMERGE = @MSGMERGE@ OBJDUMP = @OBJDUMP@ OBJEXT = @OBJEXT@ ORBIT_IDL = @ORBIT_IDL@ OS_WIN32_FALSE = @OS_WIN32_FALSE@ OS_WIN32_TRUE = @OS_WIN32_TRUE@ PACKAGE = @PACKAGE@ PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ PACKAGE_NAME = @PACKAGE_NAME@ PACKAGE_STRING = @PACKAGE_STRING@ PACKAGE_TARNAME = @PACKAGE_TARNAME@ PACKAGE_VERSION = @PACKAGE_VERSION@ PATH_SEPARATOR = @PATH_SEPARATOR@ PERL_PATH = @PERL_PATH@ PKG_CONFIG = @PKG_CONFIG@ POFILES = @POFILES@ POPT_LIBS = @POPT_LIBS@ POSUB = @POSUB@ PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@ PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@ PS_PATH = @PS_PATH@ RANLIB = @RANLIB@ SEARCHPATHSEP = @SEARCHPATHSEP@ SERVER_CFLAGS = @SERVER_CFLAGS@ SERVER_LIBS = @SERVER_LIBS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ SOPREFIX = @SOPREFIX@ STRIP = @STRIP@ USE_NLS = @USE_NLS@ VERSION = @VERSION@ WARN_CFLAGS = @WARN_CFLAGS@ XGETTEXT = @XGETTEXT@ YACC = @YACC@ YFLAGS = @YFLAGS@ ac_ct_CC = @ac_ct_CC@ ac_ct_CXX = @ac_ct_CXX@ ac_ct_F77 = @ac_ct_F77@ am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ am__include = @am__include@ am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ am__tar = @am__tar@ am__untar = @am__untar@ bindir = @bindir@ build = @build@ build_alias = @build_alias@ build_cpu = @build_cpu@ build_os = @build_os@ build_vendor = @build_vendor@ datadir = @datadir@ datarootdir = @datarootdir@ docdir = @docdir@ dvidir = @dvidir@ exec_prefix = @exec_prefix@ host = @host@ host_alias = @host_alias@ host_cpu = @host_cpu@ host_os = @host_os@ host_vendor = @host_vendor@ htmldir = @htmldir@ includedir = @includedir@ infodir = @infodir@ install_sh = @install_sh@ libdir = @libdir@ libexecdir = @libexecdir@ localedir = @localedir@ localstatedir = @localstatedir@ mandir = @mandir@ mkdir_p = @mkdir_p@ oldincludedir = @oldincludedir@ pdfdir = @pdfdir@ prefix = @prefix@ program_transform_name = @program_transform_name@ psdir = @psdir@ sbindir = @sbindir@ sharedstatedir = @sharedstatedir@ sysconfdir = @sysconfdir@ target_alias = @target_alias@ AUTOMAKE_OPTIONS = 1.6 SUBDIRS = figures # The name of the module DOC_MODULE = libbonobo # The top-level SGML file. DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.sgml # The directory containing the source code. Relative to $(srcdir). # gtk-doc will search all .c & .h files beneath here for inline comments # documenting functions and macros. DOC_SOURCE_DIR = ../../bonobo # Extra options to supply to gtkdoc-scan. SCAN_OPTIONS = --deprecated-guards="BONOBO_DISABLE_DEPRECATED" # Extra options to supply to gtkdoc-mkdb. MKDB_OPTIONS = --sgml-mode --output-format=xml # Extra options to supply to gtkdoc-fixref. FIXXREF_OPTIONS = # Used for dependencies. HFILE_GLOB = CFILE_GLOB = # Header files to ignore when scanning. IGNORE_HFILES = Bonobo.h bonobo-marshal.h bonobo-macros.h bonobo-x-object.h\ bonobo-stream.h # Images to copy into HTML directory. HTML_IMAGES = figures/persist.png figures/persist-file.png\ figures/persist-storage.png figures/persist-stream.png\ figures/stream.png figures/storage.png figures/unknown.png\ figures/running-context.png # Extra SGML files that are included by $(DOC_MAIN_SGML_FILE). content_files = faq.xml debugging.xml properties.xml refcounting.xml\ monikers-overview.xml # Other files to distribute. extra_files = # CFLAGS and LDFLAGS for compiling scan program. Only needed # if $(DOC_MODULE).types is non-empty. GTKDOC_CFLAGS = \ @CFLAGS@ \ -DGNOMELOCALEDIR=\""$(datadir)/locale"\" \ $(LIBBONOBO_CFLAGS) \ -I$(top_srcdir) \ -I$(top_builddir) GTKDOC_LIBS = $(top_builddir)/bonobo/libbonobo-2.la $(LIBBONOBO_LIBS) # If you need to override some of the declarations, place them in the # $(DOC_MODULE)-overrides.txt file and uncomment the second line here. DOC_OVERRIDES = @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CFLAGS) $(CFLAGS) @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --mode=compile $(CC) $(INCLUDES) $(AM_CFLAGS) $(CFLAGS) @GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) @GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) # We set GPATH here; this gives us semantics for GNU make # which are more like other make's VPATH, when it comes to # whether a source that is a target of one rule is then # searched for in VPATH/GPATH. # GPATH = $(srcdir) TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE) EXTRA_DIST = \ $(content_files) \ $(HTML_IMAGES) \ $(DOC_MAIN_SGML_FILE) \ $(DOC_MODULE)-sections.txt \ $(DOC_MODULE)-overrides.txt DOC_STAMPS = scan-build.stamp tmpl-build.stamp sgml-build.stamp html-build.stamp \ $(srcdir)/tmpl.stamp $(srcdir)/sgml.stamp $(srcdir)/html.stamp SCANOBJ_FILES = \ $(DOC_MODULE).args \ $(DOC_MODULE).hierarchy \ $(DOC_MODULE).interfaces \ $(DOC_MODULE).prerequisites \ $(DOC_MODULE).signals CLEANFILES = $(SCANOBJ_FILES) $(DOC_MODULE)-unused.txt $(DOC_STAMPS) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/api/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --foreign doc/api/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(mkdir_p) $(distdir)/../.. $(distdir)/figures @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkdir_p) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(mkdir_p) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ distdir) \ || exit 1; \ fi; \ done $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ dist-hook check-am: all-am check: check-recursive all-am: Makefile all-local installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-libtool \ distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-data-local install-exec-am: install-info: install-info-recursive install-man: installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic \ maintainer-clean-local mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-info-am uninstall-local uninstall-info: uninstall-info-recursive .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am all-local check \ check-am clean clean-generic clean-libtool clean-local \ clean-recursive ctags ctags-recursive dist-hook distclean \ distclean-generic distclean-libtool distclean-recursive \ distclean-tags distdir dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am \ install-data-local install-exec install-exec-am install-info \ install-info-am install-man install-strip installcheck \ installcheck-am installdirs installdirs-am maintainer-clean \ maintainer-clean-generic maintainer-clean-local \ maintainer-clean-recursive mostlyclean mostlyclean-generic \ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-info-am \ uninstall-local @ENABLE_GTK_DOC_TRUE@all-local: html-build.stamp @ENABLE_GTK_DOC_FALSE@all-local: docs: html-build.stamp #### scan #### scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB) @echo 'gtk-doc: Scanning header files' @-chmod -R u+w $(srcdir) cd $(srcdir) && \ gtkdoc-scan --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --ignore-headers="$(IGNORE_HFILES)" $(SCAN_OPTIONS) $(EXTRA_HFILES) if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" CFLAGS="$(GTKDOC_CFLAGS)" LDFLAGS="$(GTKDOC_LIBS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \ else \ cd $(srcdir) ; \ for i in $(SCANOBJ_FILES) ; do \ test -f $$i || touch $$i ; \ done \ fi touch scan-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp @true #### templates #### tmpl-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt @echo 'gtk-doc: Rebuilding template files' @-chmod -R u+w $(srcdir) cd $(srcdir) && gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS) touch tmpl-build.stamp tmpl.stamp: tmpl-build.stamp @true #### xml #### sgml-build.stamp: tmpl.stamp $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files) @echo 'gtk-doc: Building XML' @-chmod -R u+w $(srcdir) cd $(srcdir) && \ gtkdoc-mkdb --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $(MKDB_OPTIONS) touch sgml-build.stamp sgml.stamp: sgml-build.stamp @true #### html #### html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files) @echo 'gtk-doc: Building HTML' @-chmod -R u+w $(srcdir) rm -rf $(srcdir)/html mkdir $(srcdir)/html cd $(srcdir)/html && gtkdoc-mkhtml $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE) test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html ) @echo 'gtk-doc: Fixing cross-references' cd $(srcdir) && gtkdoc-fixxref --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS) touch html-build.stamp ############## clean-local: rm -f *~ *.bak rm -rf .libs maintainer-clean-local: clean cd $(srcdir) && rm -rf xml html $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt $(DOC_MODULE)-undocumented.txt install-data-local: installfiles=`echo $(srcdir)/html/*`; \ if test "$$installfiles" = '$(srcdir)/html/*'; \ then echo '-- Nothing to install' ; \ else \ $(mkinstalldirs) $(DESTDIR)$(TARGET_DIR); \ for i in $$installfiles; do \ echo '-- Installing '$$i ; \ $(INSTALL_DATA) $$i $(DESTDIR)$(TARGET_DIR); \ done; \ echo '-- Installing $(srcdir)/html/index.sgml' ; \ $(INSTALL_DATA) $(srcdir)/html/index.sgml $(DESTDIR)$(TARGET_DIR) || :; \ fi uninstall-local: rm -f $(DESTDIR)$(TARGET_DIR)/* # # Require gtk-doc when making dist # @ENABLE_GTK_DOC_TRUE@dist-check-gtkdoc: @ENABLE_GTK_DOC_FALSE@dist-check-gtkdoc: @ENABLE_GTK_DOC_FALSE@ @echo "*** gtk-doc must be installed and enabled in order to make dist" @ENABLE_GTK_DOC_FALSE@ @false dist-hook: dist-check-gtkdoc dist-hook-local mkdir $(distdir)/tmpl mkdir $(distdir)/xml mkdir $(distdir)/html -cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl -cp $(srcdir)/xml/*.xml $(distdir)/xml cp $(srcdir)/html/* $(distdir)/html if test -f $(srcdir)/$(DOC_MODULE).types; then \ cp $(srcdir)/$(DOC_MODULE).types $(distdir)/$(DOC_MODULE).types; \ fi .PHONY : dist-hook-local docs #DOC_OVERRIDES = $(DOC_MODULE)-overrides.txt # include common portion ... # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: