#! /bin/sh # Generated by configure. # Run this file to recreate the current configuration. # Compiler output produced by configure, useful for debugging # configure, is in config.log if it exists. debug=false ac_cs_recheck=false ac_cs_silent=false SHELL=${CONFIG_SHELL-/bin/sh} ## --------------------- ## ## M4sh Initialization. ## ## --------------------- ## # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then emulate sh NULLCMD=: # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which # is contrary to our usage. Disable this feature. alias -g '${1+"$@"}'='"$@"' elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then set -o posix fi DUALCASE=1; export DUALCASE # for MKS sh # Support unset when possible. if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then as_unset=unset else as_unset=false fi # Work around bugs in pre-3.0 UWIN ksh. $as_unset ENV MAIL MAILPATH PS1='$ ' PS2='> ' PS4='+ ' # NLS nuisances. for as_var in \ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ LC_TELEPHONE LC_TIME do if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then eval $as_var=C; export $as_var else $as_unset $as_var fi done # Required to use basename. if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then as_basename=basename else as_basename=false fi # Name of the executable. as_me=`$as_basename "$0" || $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ X"$0" : 'X\(//\)$' \| \ X"$0" : 'X\(/\)$' \| \ . : '\(.\)' 2>/dev/null || echo X/"$0" | sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } /^X\/\(\/\/\)$/{ s//\1/; q; } /^X\/\(\/\).*/{ s//\1/; q; } s/.*/./; q'` # PATH needs CR, and LINENO needs CR and PATH. # Avoid depending upon Character Ranges. as_cr_letters='abcdefghijklmnopqrstuvwxyz' as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' as_cr_Letters=$as_cr_letters$as_cr_LETTERS as_cr_digits='0123456789' as_cr_alnum=$as_cr_Letters$as_cr_digits # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh echo "exit 0" >>conf$$.sh chmod +x conf$$.sh if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then PATH_SEPARATOR=';' else PATH_SEPARATOR=: fi rm -f conf$$.sh fi as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" || { # Find who we are. Look in the path if we contain no path at all # relative or not. case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break done ;; esac # We did not find ourselves, most probably we were run as `sh COMMAND' # in which case we are not to be found in the path. if test "x$as_myself" = x; then as_myself=$0 fi if test ! -f "$as_myself"; then { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} { (exit 1); exit 1; }; } fi case $CONFIG_SHELL in '') as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for as_base in sh bash ksh sh5; do case $as_dir in /*) if ("$as_dir/$as_base" -c ' as_lineno_1=$LINENO as_lineno_2=$LINENO as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` test "x$as_lineno_1" != "x$as_lineno_2" && test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } CONFIG_SHELL=$as_dir/$as_base export CONFIG_SHELL exec "$CONFIG_SHELL" "$0" ${1+"$@"} fi;; esac done done ;; esac # Create $as_me.lineno as a copy of $as_myself, but with $LINENO # uniformly replaced by the line number. The first 'sed' inserts a # line-number line before each line; the second 'sed' does the real # work. The second script uses 'N' to pair each line-number line # with the numbered line, and appends trailing '-' during # substitution so that $LINENO is not a special case at line end. # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) sed '=' <$as_myself | sed ' N s,$,-, : loop s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, t loop s,-$,, s,^['$as_cr_digits']*\n,, ' >$as_me.lineno && chmod +x $as_me.lineno || { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} { (exit 1); exit 1; }; } # Don't try to exec as it changes $[0], causing all sort of problems # (the dirname of $[0] is not the place where we might find the # original and so on. Autoconf is especially sensible to this). . ./$as_me.lineno # Exit status is that of the last command. exit } case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in *c*,-n*) ECHO_N= ECHO_C=' ' ECHO_T=' ' ;; *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; *) ECHO_N= ECHO_C='\c' ECHO_T= ;; esac if expr a : '\(a\)' >/dev/null 2>&1; then as_expr=expr else as_expr=false fi rm -f conf$$ conf$$.exe conf$$.file echo >conf$$.file if ln -s conf$$.file conf$$ 2>/dev/null; then # We could just check for DJGPP; but this test a) works b) is more generic # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). if test -f conf$$.exe; then # Don't use ln at all; we don't have any links as_ln_s='cp -p' else as_ln_s='ln -s' fi elif ln conf$$.file conf$$ 2>/dev/null; then as_ln_s=ln else as_ln_s='cp -p' fi rm -f conf$$ conf$$.exe conf$$.file if mkdir -p . 2>/dev/null; then as_mkdir_p=: else test -d ./-p && rmdir ./-p as_mkdir_p=false fi as_executable_p="test -f" # Sed expression to map a string onto a valid CPP name. as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" # Sed expression to map a string onto a valid variable name. as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" # IFS # We need space, tab and new line, in precisely that order. as_nl=' ' IFS=" $as_nl" # CDPATH. $as_unset CDPATH exec 6>&1 # Open the log real soon, to keep \$[0] and so on meaningful, and to # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. Logging --version etc. is OK. exec 5>>config.log { echo sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ## Running $as_me. ## _ASBOX } >&5 cat >&5 <<_CSEOF This file was extended by libgii $as_me 1.0.2, which was generated by GNU Autoconf 2.59. Invocation command line was CONFIG_FILES = $CONFIG_FILES CONFIG_HEADERS = $CONFIG_HEADERS CONFIG_LINKS = $CONFIG_LINKS CONFIG_COMMANDS = $CONFIG_COMMANDS $ $0 $@ _CSEOF echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 echo >&5 config_files=" Makefile gg/Makefile gg/lib/Makefile gg/ggtick/Makefile gii/Makefile input/Makefile input/null/Makefile input/file/Makefile input/tcp/Makefile input/stdin/Makefile input/x/Makefile input/mouse/Makefile input/linux_mouse/Makefile input/linux_kbd/Makefile input/linux_joy/Makefile input/linux_evdev/Makefile input/ipaq_touchscreen/Makefile input/touchscreen/Makefile input/spaceorb/Makefile input/vgl/Makefile input/directx/Makefile input/fdselect/Makefile input/pcjoy/Makefile input/lk201/Makefile input/kii/Makefile input/cocoa/Makefile input/quartz/Makefile filter/Makefile filter/mouse/Makefile filter/keytrans/Makefile filter/save/Makefile filter/tcp/Makefile input-shared/Makefile filter-shared/Makefile demos/Makefile include/Makefile include/ggi/system.h include/ggi/Makefile include/ggi/input/Makefile include/ggi/internal/Makefile include/ggi/internal/gg_replace.h doc/Makefile doc/man/Makefile regress/Makefile regress/gg/Makefile regress/gii/Makefile m4/Makefile libgii.conf dist/Makefile dist/rpm/Makefile dist/rpm/libgii.spec" config_headers=" config.h" config_commands=" depfiles libtool" ac_cs_usage="\ \`$as_me' instantiates files from templates according to the current configuration. Usage: $0 [OPTIONS] [FILE]... -h, --help print this help, then exit -V, --version print version number, then exit -q, --quiet do not print progress messages -d, --debug don't remove temporary files --recheck update $as_me by reconfiguring in the same conditions --file=FILE[:TEMPLATE] instantiate the configuration file FILE --header=FILE[:TEMPLATE] instantiate the configuration header FILE Configuration files: $config_files Configuration headers: $config_headers Configuration commands: $config_commands Report bugs to ." ac_cs_version="\ libgii config.status 1.0.2 configured by ./configure, generated by GNU Autoconf 2.59, with options \"'--disable-vgl' '--x-libraries=/usr/X11R6/lib' '--x-includes=/usr/X11R6/include' '--prefix=/usr/local' 'i386-unknown-gnu' 'CC=cc' 'CFLAGS=-fno-common' 'build_alias=i386-unknown-gnu' 'host_alias=i386-unknown-gnu' 'target_alias=i386-unknown-gnu'\" Copyright (C) 2003 Free Software Foundation, Inc. This config.status script is free software; the Free Software Foundation gives unlimited permission to copy, distribute and modify it." srcdir=. INSTALL="/usr/bin/install -c -o root -g wheel" # If no file are specified by the user, then we need to provide default # value. By we need to know if files were specified by the user. ac_need_defaults=: while test $# != 0 do case $1 in --*=*) ac_option=`expr "x$1" : 'x\([^=]*\)='` ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ac_shift=: ;; -*) ac_option=$1 ac_optarg=$2 ac_shift=shift ;; *) # This is not an option, so the user has probably given explicit # arguments. ac_option=$1 ac_need_defaults=false;; esac case $ac_option in # Handling of the options. -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) ac_cs_recheck=: ;; --version | --vers* | -V ) echo "$ac_cs_version"; exit 0 ;; --he | --h) # Conflict between --help and --header { { echo "$as_me:$LINENO: error: ambiguous option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: ambiguous option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; };; --help | --hel | -h ) echo "$ac_cs_usage"; exit 0 ;; --debug | --d* | -d ) debug=: ;; --file | --fil | --fi | --f ) $ac_shift CONFIG_FILES="$CONFIG_FILES $ac_optarg" ac_need_defaults=false;; --header | --heade | --head | --hea ) $ac_shift CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" ac_need_defaults=false;; -q | -quiet | --quiet | --quie | --qui | --qu | --q \ | -silent | --silent | --silen | --sile | --sil | --si | --s) ac_cs_silent=: ;; # This is an error. -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 Try \`$0 --help' for more information." >&5 echo "$as_me: error: unrecognized option: $1 Try \`$0 --help' for more information." >&2;} { (exit 1); exit 1; }; } ;; *) ac_config_targets="$ac_config_targets $1" ;; esac shift done ac_configure_extra_args= if $ac_cs_silent; then exec 6>/dev/null ac_configure_extra_args="$ac_configure_extra_args --silent" fi if $ac_cs_recheck; then echo "running /bin/sh ./configure " '--disable-vgl' '--x-libraries=/usr/X11R6/lib' '--x-includes=/usr/X11R6/include' '--prefix=/usr/local' 'i386-unknown-gnu' 'CC=cc' 'CFLAGS=-fno-common' 'build_alias=i386-unknown-gnu' 'host_alias=i386-unknown-gnu' 'target_alias=i386-unknown-gnu' $ac_configure_extra_args " --no-create --no-recursion" >&6 exec /bin/sh ./configure '--disable-vgl' '--x-libraries=/usr/X11R6/lib' '--x-includes=/usr/X11R6/include' '--prefix=/usr/local' 'i386-unknown-gnu' 'CC=cc' 'CFLAGS=-fno-common' 'build_alias=i386-unknown-gnu' 'host_alias=i386-unknown-gnu' 'target_alias=i386-unknown-gnu' $ac_configure_extra_args --no-create --no-recursion fi # # INIT-COMMANDS section. # AMDEP_TRUE="" ac_aux_dir="." # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH sed_quote_subst='s/\(["`$\\]\)/\\\1/g' double_quote_subst='s/\(["`\\]\)/\\\1/g' delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' macro_version='2.1a' macro_revision='1.2270' AS='as' DLLTOOL='dlltool' OBJDUMP='objdump' enable_shared='no' enable_static='yes' pic_mode='default' enable_fast_install='yes' host_alias='i386-unknown-gnu' host='i386-unknown-gnu' host_os='gnu' build_alias='i386-unknown-gnu' build='i386-unknown-gnu' build_os='gnu' SED='/usr/local/bin/sed' Xsed='sed -e 1s/^X//' GREP='grep' EGREP='grep -E' FGREP='fgrep' LD='/usr/bin/ld' NM='/usr/bin/nm -p' LN_S='ln -s' max_cmd_len='' ac_objext='o' exeext='' reload_flag=' -r' reload_cmds='$LD$reload_flag -o $output$reload_objs' deplibs_check_method='pass_all' file_magic_cmd='$MAGIC_CMD' AR='ar' AR_FLAGS='cru' STRIP='strip' RANLIB='ranlib' old_postinstall_cmds='chmod 644 $oldlib~$RANLIB $oldlib' old_postuninstall_cmds='' old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs~$RANLIB $oldlib' CC='cc' CFLAGS='-fno-common -Wall -pedantic -D_REENTRANT -D_THREAD_SAFE -DDEBUG' compiler='cc' GCC='' lt_cv_sys_global_symbol_pipe='' lt_cv_sys_global_symbol_to_cdecl='' lt_cv_sys_global_symbol_to_c_name_address='sed -n -e '\''s/^: \([^ ]*\) $/ {\"\1\", (void *) 0},/p'\'' -e '\''s/^[BCDEGRST]* \([^ ]*\) \([^ ]*\)$/ {"\2", (void *) \&\2},/p'\''' objdir='.libs' SHELL='/bin/sh' ECHO='echo' MAGIC_CMD='file' lt_prog_compiler_no_builtin_flag='' lt_prog_compiler_wl='' lt_prog_compiler_pic=' -DPIC' lt_prog_compiler_static='' lt_cv_prog_compiler_c_o='yes' need_locks='no' libext='a' shrext_cmds='.so' extract_expsyms_cmds='' archive_cmds_need_lc='yes' enable_shared_with_static_runtimes='no' export_dynamic_flag_spec='' whole_archive_flag_spec='' old_archive_from_new_cmds='' old_archive_from_expsyms_cmds='' archive_cmds='' archive_expsym_cmds='' module_cmds='' module_expsym_cmds='' with_gnu_ld='no' allow_undefined_flag='' no_undefined_flag='' hardcode_libdir_flag_spec='' hardcode_libdir_flag_spec_ld='' hardcode_libdir_separator='' hardcode_direct='no' hardcode_minus_L='no' hardcode_shlibpath_var='unsupported' hardcode_automatic='no' inherit_rpath='no' link_all_deplibs='unknown' fix_srcfile_path='' always_export_symbols='no' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' exclude_expsyms='_GLOBAL_OFFSET_TABLE_' include_expsyms='' prelink_cmds='' file_list_spec='' variables_saved_for_relink='PATH LD_LIBRARY_PATH ' need_lib_prefix='no' need_version='no' version_type='linux' runpath_var='' shlibpath_var='LD_LIBRARY_PATH' shlibpath_overrides_runpath='unknown' libname_spec='lib$name' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' postinstall_cmds='' postuninstall_cmds='' finish_cmds='' finish_eval='' hardcode_into_libs='yes' sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' sys_lib_dlsearch_path_spec='/lib /usr/lib' hardcode_action='unsupported' enable_dlopen='unknown' enable_dlopen_self='unknown' enable_dlopen_self_static='unknown' old_striplib='' striplib='' LTCC='cc' LTCFLAGS='-fno-common' compiler='cc' # Quote evaled strings. for var in SED GREP EGREP FGREP LD NM LN_S reload_flag deplibs_check_method file_magic_cmd AR AR_FLAGS STRIP RANLIB CC CFLAGS compiler lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl lt_cv_sys_global_symbol_to_c_name_address SHELL ECHO lt_prog_compiler_no_builtin_flag lt_prog_compiler_wl lt_prog_compiler_pic lt_prog_compiler_static lt_cv_prog_compiler_c_o need_locks shrext_cmds export_dynamic_flag_spec whole_archive_flag_spec with_gnu_ld allow_undefined_flag no_undefined_flag hardcode_libdir_flag_spec hardcode_libdir_flag_spec_ld hardcode_libdir_separator fix_srcfile_path exclude_expsyms include_expsyms file_list_spec variables_saved_for_relink libname_spec library_names_spec soname_spec finish_eval old_striplib striplib; do case `eval \\$ECHO "X\\$$var"` in *[\\\`\"\$]*) eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\$$var\\\"" ;; esac done # Double-quote double-evaled strings. for var in reload_cmds old_postinstall_cmds old_postuninstall_cmds old_archive_cmds extract_expsyms_cmds old_archive_from_new_cmds old_archive_from_expsyms_cmds archive_cmds archive_expsym_cmds module_cmds module_expsym_cmds export_symbols_cmds prelink_cmds postinstall_cmds postuninstall_cmds finish_cmds sys_lib_search_path_spec sys_lib_dlsearch_path_spec; do case `eval \\$ECHO "X\\$$var"` in *[\\\`\"\$]*) eval "lt_$var=\\\"\`\$ECHO \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\$$var\\\"" ;; esac done # Fix-up fallback echo if it was mangled by the above quoting rules. case $lt_ECHO in *'\$0 --fallback-echo"') lt_ECHO=`$ECHO "X$lt_ECHO" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ;; esac ac_aux_dir='.' xsi_shell='yes' # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes INIT. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi PACKAGE='libgii' VERSION='1.0.2' TIMESTAMP='' RM='rm -f' ofile='libtool' ac_aux_dir='.' for ac_config_target in $ac_config_targets do case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; "gg/Makefile" ) CONFIG_FILES="$CONFIG_FILES gg/Makefile" ;; "gg/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES gg/lib/Makefile" ;; "gg/ggtick/Makefile" ) CONFIG_FILES="$CONFIG_FILES gg/ggtick/Makefile" ;; "gii/Makefile" ) CONFIG_FILES="$CONFIG_FILES gii/Makefile" ;; "input/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/Makefile" ;; "input/null/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/null/Makefile" ;; "input/file/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/file/Makefile" ;; "input/tcp/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/tcp/Makefile" ;; "input/stdin/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/stdin/Makefile" ;; "input/x/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/x/Makefile" ;; "input/mouse/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/mouse/Makefile" ;; "input/linux_mouse/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/linux_mouse/Makefile" ;; "input/linux_kbd/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/linux_kbd/Makefile" ;; "input/linux_joy/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/linux_joy/Makefile" ;; "input/linux_evdev/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/linux_evdev/Makefile" ;; "input/ipaq_touchscreen/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/ipaq_touchscreen/Makefile" ;; "input/touchscreen/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/touchscreen/Makefile" ;; "input/spaceorb/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/spaceorb/Makefile" ;; "input/vgl/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/vgl/Makefile" ;; "input/directx/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/directx/Makefile" ;; "input/fdselect/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/fdselect/Makefile" ;; "input/pcjoy/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/pcjoy/Makefile" ;; "input/lk201/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/lk201/Makefile" ;; "input/kii/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/kii/Makefile" ;; "input/cocoa/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/cocoa/Makefile" ;; "input/quartz/Makefile" ) CONFIG_FILES="$CONFIG_FILES input/quartz/Makefile" ;; "filter/Makefile" ) CONFIG_FILES="$CONFIG_FILES filter/Makefile" ;; "filter/mouse/Makefile" ) CONFIG_FILES="$CONFIG_FILES filter/mouse/Makefile" ;; "filter/keytrans/Makefile" ) CONFIG_FILES="$CONFIG_FILES filter/keytrans/Makefile" ;; "filter/save/Makefile" ) CONFIG_FILES="$CONFIG_FILES filter/save/Makefile" ;; "filter/tcp/Makefile" ) CONFIG_FILES="$CONFIG_FILES filter/tcp/Makefile" ;; "input-shared/Makefile" ) CONFIG_FILES="$CONFIG_FILES input-shared/Makefile" ;; "filter-shared/Makefile" ) CONFIG_FILES="$CONFIG_FILES filter-shared/Makefile" ;; "demos/Makefile" ) CONFIG_FILES="$CONFIG_FILES demos/Makefile" ;; "include/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/Makefile" ;; "include/ggi/system.h" ) CONFIG_FILES="$CONFIG_FILES include/ggi/system.h" ;; "include/ggi/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/ggi/Makefile" ;; "include/ggi/input/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/ggi/input/Makefile" ;; "include/ggi/internal/Makefile" ) CONFIG_FILES="$CONFIG_FILES include/ggi/internal/Makefile" ;; "include/ggi/internal/gg_replace.h" ) CONFIG_FILES="$CONFIG_FILES include/ggi/internal/gg_replace.h" ;; "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; "doc/man/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/man/Makefile" ;; "regress/Makefile" ) CONFIG_FILES="$CONFIG_FILES regress/Makefile" ;; "regress/gg/Makefile" ) CONFIG_FILES="$CONFIG_FILES regress/gg/Makefile" ;; "regress/gii/Makefile" ) CONFIG_FILES="$CONFIG_FILES regress/gii/Makefile" ;; "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;; "libgii.conf" ) CONFIG_FILES="$CONFIG_FILES libgii.conf" ;; "dist/Makefile" ) CONFIG_FILES="$CONFIG_FILES dist/Makefile" ;; "dist/rpm/Makefile" ) CONFIG_FILES="$CONFIG_FILES dist/rpm/Makefile" ;; "dist/rpm/libgii.spec" ) CONFIG_FILES="$CONFIG_FILES dist/rpm/libgii.spec" ;; "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool" ) CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} { (exit 1); exit 1; }; };; esac done # If the user did not use the arguments to specify the items to instantiate, # then the envvar interface is used. Set only those that are not. # We use the long form for the default assignment because of an extremely # bizarre bug on SunOS 4.1.3. if $ac_need_defaults; then test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands fi # Have a temporary directory for convenience. Make it in the build tree # simply because there is no reason to put it here, and in addition, # creating and moving files from /tmp can sometimes cause problems. # Create a temporary directory, and hook for its removal unless debugging. $debug || { trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 trap '{ (exit 1); exit 1; }' 1 2 13 15 } # Create a (secure) tmp directory for tmp files. { tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" } || { tmp=./confstat$$-$RANDOM (umask 077 && mkdir $tmp) } || { echo "$me: cannot create a temporary directory in ." >&2 { (exit 1); exit 1; } } # # CONFIG_FILES section. # # No need to generate the scripts if there are no CONFIG_FILES. # This happens for instance when ./config.status config.h if test -n "$CONFIG_FILES"; then # Protect against being on the right side of a sed subst in config.status. sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g; s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF s,@SHELL@,/bin/sh,;t t s,@PATH_SEPARATOR@,:,;t t s,@PACKAGE_NAME@,libgii,;t t s,@PACKAGE_TARNAME@,libgii,;t t s,@PACKAGE_VERSION@,1.0.2,;t t s,@PACKAGE_STRING@,libgii 1.0.2,;t t s,@PACKAGE_BUGREPORT@,http://www.ggi-project.org/contact.html,;t t s,@exec_prefix@,${prefix},;t t s,@prefix@,,;t t s,@program_transform_name@,s,x,x,,;t t s,@bindir@,${exec_prefix}/bin,;t t s,@sbindir@,${exec_prefix}/sbin,;t t s,@libexecdir@,${exec_prefix}/libexec,;t t s,@datadir@,${prefix}/share,;t t s,@sysconfdir@,${prefix}/etc,;t t s,@sharedstatedir@,${prefix}/com,;t t s,@localstatedir@,${prefix}/var,;t t s,@libdir@,${exec_prefix}/lib,;t t s,@includedir@,${prefix}/include,;t t s,@oldincludedir@,/usr/include,;t t s,@infodir@,${prefix}/info,;t t s,@mandir@,${prefix}/man,;t t s,@build_alias@,i386-unknown-gnu,;t t s,@host_alias@,i386-unknown-gnu,;t t s,@target_alias@,i386-unknown-gnu,;t t s,@DEFS@,-DHAVE_CONFIG_H,;t t s,@ECHO_C@,,;t t s,@ECHO_N@,-n,;t t s,@ECHO_T@,,;t t s,@LIBS@,,;t t s,@INSTALL_PROGRAM@,install -s -o root -g wheel -m 555,;t t s,@INSTALL_SCRIPT@,install -o root -g wheel -m 555,;t t s,@INSTALL_DATA@,install -o root -g wheel -m 444,;t t s,@CYGPATH_W@,echo,;t t s,@PACKAGE@,libgii,;t t s,@VERSION@,1.0.2,;t t s,@ACLOCAL@,${SHELL} /mnt/gmirror/ports/devel/libgii/work/libgii-1.0.2/missing --run aclocal-1.9,;t t s,@AUTOCONF@,${SHELL} /mnt/gmirror/ports/devel/libgii/work/libgii-1.0.2/missing --run autoconf,;t t s,@AUTOMAKE@,${SHELL} /mnt/gmirror/ports/devel/libgii/work/libgii-1.0.2/missing --run automake-1.9,;t t s,@AUTOHEADER@,${SHELL} /mnt/gmirror/ports/devel/libgii/work/libgii-1.0.2/missing --run autoheader,;t t s,@MAKEINFO@,${SHELL} /mnt/gmirror/ports/devel/libgii/work/libgii-1.0.2/missing --run makeinfo,;t t s,@install_sh@,/mnt/gmirror/ports/devel/libgii/work/libgii-1.0.2/install-sh,;t t s,@STRIP@,strip,;t t s,@ac_ct_STRIP@,strip,;t t s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t s,@mkdir_p@,mkdir -p --,;t t s,@AWK@,gawk,;t t s,@SET_MAKE@,,;t t s,@am__leading_dot@,.,;t t s,@AMTAR@,${SHELL} /mnt/gmirror/ports/devel/libgii/work/libgii-1.0.2/missing --run tar,;t t s,@am__tar@,${AMTAR} chof - "$$tardir",;t t s,@am__untar@,${AMTAR} xf -,;t t s,@MAINTAINER_MODE_TRUE@,#,;t t s,@MAINTAINER_MODE_FALSE@,,;t t s,@MAINT@,#,;t t s,@build@,i386-unknown-gnu,;t t s,@build_cpu@,i386,;t t s,@build_vendor@,unknown,;t t s,@build_os@,gnu,;t t s,@host@,i386-unknown-gnu,;t t s,@host_cpu@,i386,;t t s,@host_vendor@,unknown,;t t s,@host_os@,gnu,;t t s,@CC@,cc,;t t s,@CFLAGS@,-fno-common -Wall -pedantic -D_REENTRANT -D_THREAD_SAFE -DDEBUG,;t t s,@LDFLAGS@,,;t t s,@CPPFLAGS@,,;t t s,@ac_ct_CC@,,;t t s,@EXEEXT@,,;t t s,@OBJEXT@,,;t t s,@DEPDIR@,.deps,;t t s,@am__include@,include,;t t s,@am__quote@,,;t t s,@AMDEP_TRUE@,,;t t s,@AMDEP_FALSE@,#,;t t s,@AMDEPBACKSLASH@,\,;t t s,@CCDEPMODE@,depmode=gcc3,;t t s,@am__fastdepCC_TRUE@,,;t t s,@am__fastdepCC_FALSE@,#,;t t s,@CPP@,cc -E,;t t s,@LN_S@,ln -s,;t t s,@RANLIB@,ranlib,;t t s,@ac_ct_RANLIB@,ranlib,;t t s,@am__fastdepOBJC_TRUE@,#,;t t s,@am__fastdepOBJC_FALSE@,,;t t s,@AS@,as,;t t s,@ac_ct_AS@,,;t t s,@DLLTOOL@,dlltool,;t t s,@ac_ct_DLLTOOL@,,;t t s,@OBJDUMP@,objdump,;t t s,@ac_ct_OBJDUMP@,,;t t s,@LIBTOOL@,$(SHELL) $(top_builddir)/libtool,;t t s,@SED@,/usr/local/bin/sed,;t t s,@EGREP@,grep -E,;t t s,@FGREP@,fgrep,;t t s,@GREP@,grep,;t t s,@LD@,/usr/bin/ld,;t t s,@DUMPBIN@,,;t t s,@ac_ct_DUMPBIN@,,;t t s,@NM@,/usr/bin/nm -p,;t t s,@AR@,ar,;t t s,@ac_ct_AR@,ar,;t t s,@lt_ECHO@,echo,;t t s,@extra_includes@,,;t t s,@extra_libraries@,,;t t s,@SSIZE_T@,__darwin_ssize_t,;t t s,@INTPTR_T@,signed int,;t t s,@UINTPTR_T@,unsigned int,;t t s,@NEED_QUAD_TRUE@,#,;t t s,@NEED_QUAD_FALSE@,,;t t s,@ARCH_ALPHA_TRUE@,#,;t t s,@ARCH_ALPHA_FALSE@,,;t t s,@ARCH_IA32_TRUE@,,;t t s,@ARCH_IA32_FALSE@,#,;t t s,@ARCH_PPC_TRUE@,#,;t t s,@ARCH_PPC_FALSE@,,;t t s,@ARCH_SPARC_TRUE@,#,;t t s,@ARCH_SPARC_FALSE@,,;t t s,@DLLEXT@,so,;t t s,@OS_WIN32_TRUE@,#,;t t s,@OS_WIN32_FALSE@,,;t t s,@OS_WIN32_CYGWIN_TRUE@,#,;t t s,@OS_WIN32_CYGWIN_FALSE@,,;t t s,@OS_WIN32_MINGW_TRUE@,#,;t t s,@OS_WIN32_MINGW_FALSE@,,;t t s,@OS_WIN32_PW32_TRUE@,#,;t t s,@OS_WIN32_PW32_FALSE@,,;t t s,@OS_DARWIN_TRUE@,#,;t t s,@OS_DARWIN_FALSE@,,;t t s,@OS_FREEBSD_TRUE@,#,;t t s,@OS_FREEBSD_FALSE@,,;t t s,@OS_LINUX_TRUE@,#,;t t s,@OS_LINUX_FALSE@,,;t t s,@OS_NETBSD_TRUE@,#,;t t s,@OS_NETBSD_FALSE@,,;t t s,@OS_OPENBSD_TRUE@,#,;t t s,@OS_OPENBSD_FALSE@,,;t t s,@OS_SOLARIS_TRUE@,#,;t t s,@OS_SOLARIS_FALSE@,,;t t s,@OS_AIX_TRUE@,#,;t t s,@OS_AIX_FALSE@,,;t t s,@OS_DEFAULT_TRUE@,,;t t s,@OS_DEFAULT_FALSE@,#,;t t s,@LIBOBJS@,,;t t s,@THREADLIBS@,-pthread,;t t s,@PTLOCK_TRUE@,,;t t s,@PTLOCK_FALSE@,#,;t t s,@WIN32LOCK_TRUE@,#,;t t s,@WIN32LOCK_FALSE@,,;t t s,@BUILTINLOCK_TRUE@,#,;t t s,@BUILTINLOCK_FALSE@,,;t t s,@X_CFLAGS@,,;t t s,@X_PRE_LIBS@,,;t t s,@X_LIBS@,,;t t s,@X_EXTRA_LIBS@,,;t t s,@XF86DGA_LIBS@,,;t t s,@INPUT_XF86DGA_TRUE@,#,;t t s,@INPUT_XF86DGA_FALSE@,,;t t s,@BUILTIN_INPUT_NULL_TRUE@,,;t t s,@BUILTIN_INPUT_NULL_FALSE@,#,;t t s,@BUILTIN_INPUT_FILE_TRUE@,,;t t s,@BUILTIN_INPUT_FILE_FALSE@,#,;t t s,@BUILTIN_INPUT_IPAQ_TS_TRUE@,#,;t t s,@BUILTIN_INPUT_IPAQ_TS_FALSE@,,;t t s,@BUILTIN_INPUT_ZAURUS_TS_TRUE@,#,;t t s,@BUILTIN_INPUT_ZAURUS_TS_FALSE@,,;t t s,@BUILTIN_INPUT_TCP_TRUE@,,;t t s,@BUILTIN_INPUT_TCP_FALSE@,#,;t t s,@BUILTIN_INPUT_STDIN_TRUE@,#,;t t s,@BUILTIN_INPUT_STDIN_FALSE@,,;t t s,@BUILTIN_INPUT_X_TRUE@,,;t t s,@BUILTIN_INPUT_X_FALSE@,#,;t t s,@BUILTIN_INPUT_MOUSE_TRUE@,#,;t t s,@BUILTIN_INPUT_MOUSE_FALSE@,,;t t s,@BUILTIN_INPUT_LINUX_MOUSE_TRUE@,#,;t t s,@BUILTIN_INPUT_LINUX_MOUSE_FALSE@,,;t t s,@BUILTIN_INPUT_LINUX_KBD_TRUE@,,;t t s,@BUILTIN_INPUT_LINUX_KBD_FALSE@,#,;t t s,@BUILTIN_INPUT_LINUX_JOY_TRUE@,#,;t t s,@BUILTIN_INPUT_LINUX_JOY_FALSE@,,;t t s,@BUILTIN_INPUT_LINUX_EVDEV_TRUE@,#,;t t s,@BUILTIN_INPUT_LINUX_EVDEV_FALSE@,,;t t s,@BUILTIN_INPUT_SPACEORB_TRUE@,,;t t s,@BUILTIN_INPUT_SPACEORB_FALSE@,#,;t t s,@BUILTIN_INPUT_VGL_TRUE@,#,;t t s,@BUILTIN_INPUT_VGL_FALSE@,,;t t s,@BUILTIN_INPUT_DIRECTX_TRUE@,#,;t t s,@BUILTIN_INPUT_DIRECTX_FALSE@,,;t t s,@BUILTIN_INPUT_PCJOY_TRUE@,#,;t t s,@BUILTIN_INPUT_PCJOY_FALSE@,,;t t s,@BUILTIN_INPUT_LK201_TRUE@,#,;t t s,@BUILTIN_INPUT_LK201_FALSE@,,;t t s,@BUILTIN_INPUT_KII_TRUE@,#,;t t s,@BUILTIN_INPUT_KII_FALSE@,,;t t s,@BUILTIN_INPUT_COCOA_TRUE@,#,;t t s,@BUILTIN_INPUT_COCOA_FALSE@,,;t t s,@BUILTIN_INPUT_QUARTZ_TRUE@,#,;t t s,@BUILTIN_INPUT_QUARTZ_FALSE@,,;t t s,@BUILTIN_FILTER_MOUSE_TRUE@,,;t t s,@BUILTIN_FILTER_MOUSE_FALSE@,#,;t t s,@BUILTIN_FILTER_KEYTRANS_TRUE@,,;t t s,@BUILTIN_FILTER_KEYTRANS_FALSE@,#,;t t s,@BUILTIN_FILTER_SAVE_TRUE@,,;t t s,@BUILTIN_FILTER_SAVE_FALSE@,#,;t t s,@BUILTIN_FILTER_TCP_TRUE@,,;t t s,@BUILTIN_FILTER_TCP_FALSE@,#,;t t s,@MEMDEBUG_TRUE@,#,;t t s,@MEMDEBUG_FALSE@,,;t t s,@OBJC@,,;t t s,@OBJCFLAGS@,,;t t s,@OBJCDEPMODE@,,;t t s,@OBJCCOMPILE@,,;t t s,@REPLACE_MEMCMP@,/* using system memcmp */,;t t s,@REPLACE_STRTOUL@,/* using system strtoul */,;t t s,@REPLACE_GETOPT@,/* using system getopt */,;t t s,@REPLACE_SNPRINTF@,/* using system snprintf */,;t t s,@REPLACE_VSNPRINTF@,/* using system vsnprintf */,;t t s,@REPLACE_STRLCPY@,/* using system strlcpy */,;t t s,@REPLACE_STRLCAT@,/* using system strlcat */,;t t s,@REPLACE_STRCASECMP@,/* using system strcasecmp */,;t t s,@REPLACE_STRNCASECMP@,/* using system strncasecmp */,;t t s,@REPLACE_POPEN@,/* using system popen */,;t t s,@REPLACE_PCLOSE@,/* using system pclose */,;t t s,@REPLACELIB@,,;t t s,@INTTYPES_INCLUDE@,,;t t s,@TIMEVAL_INCLUDE@,#include ,;t t s,@C_ASM_INCLUDE@,,;t t s,@GGI_8@,char,;t t s,@GGI_16@,short,;t t s,@GGI_32@,int,;t t s,@GGI_64@,long long,;t t s,@GGI_DEFINE_INT64@,#define,;t t s,@GGI_ENDIAN@,#define GGI_LITTLE_ENDIAN 1,;t t s,@GG_ATEXIT@,,;t t s,@TOPLEVELSUBDIRS@,include gg gii input filter regress demos doc m4 dist,;t t s,@GGSUBDIRS@,,;t t s,@INPUTSUBDIRS@, null file tcp x linux_kbd spaceorb,;t t s,@INPUTMODULES@,,;t t s,@FILTERSUBDIRS@, mouse keytrans save tcp,;t t s,@FILTERMODULES@,,;t t s,@TCPCONV@,libtcpconv.la,;t t s,@DEMOS@, xsendbut$(EXEEXT),;t t s,@GGDLLIBS@, -pthread,;t t s,@SELECTLIBS@,,;t t s,@NETLIBS@,,;t t s,@FD_INCLUDE@,,;t t s,@ggi_subdir@,ggi,;t t s,@ggi_sysconfdir_to_libdir@,/lib/ggi,;t t s,@ggi_sysconfdir@,/etc/ggi,;t t s,@static_libdir@,/lib,;t t s,@static_sysconfdir@,/etc,;t t s,@LTLIBOBJS@,,;t t CEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_lines=48 ac_sed_frag=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_lines # Line after last line for current file. ac_more_lines=: ac_sed_cmds= while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag else sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag fi if test ! -s $tmp/subs.frag; then ac_more_lines=false else # The purpose of the label and of the branching condition is to # speed up the sed processing (if there are no `@' at all, there # is no need to browse any of the substitutions). # These are the two extra sed commands mentioned above. (echo ':t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" else ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" fi ac_sed_frag=`expr $ac_sed_frag + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_lines` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi fi # test -n "$CONFIG_FILES" for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac case $INSTALL in [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; *) ac_INSTALL=$ac_top_builddir$INSTALL ;; esac if test x"$ac_file" != x-; then { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} rm -f "$ac_file" fi # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then configure_input= else configure_input="$ac_file. " fi configure_input=$configure_input"Generated from `echo $ac_file_in | sed 's,.*/,,'` by configure." # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } sed "/^[ ]*VPATH[ ]*=/{ s/:*\$(srcdir):*/:/; s/:*\${srcdir}:*/:/; s/:*@srcdir@:*/:/; s/^\([^=]*=[ ]*\):*/\1/; s/:*$//; s/^[^=]*=[ ]*$//; } :t /@[a-zA-Z_][a-zA-Z_0-9]*@/!b s,@configure_input@,$configure_input,;t t s,@srcdir@,$ac_srcdir,;t t s,@abs_srcdir@,$ac_abs_srcdir,;t t s,@top_srcdir@,$ac_top_srcdir,;t t s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t s,@builddir@,$ac_builddir,;t t s,@abs_builddir@,$ac_abs_builddir,;t t s,@top_builddir@,$ac_top_builddir,;t t s,@abs_top_builddir@,$ac_abs_top_builddir,;t t s,@INSTALL@,$ac_INSTALL,;t t " $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out rm -f $tmp/stdin if test x"$ac_file" != x-; then mv $tmp/out $ac_file else cat $tmp/out rm -f $tmp/out fi done # # CONFIG_HEADER section. # # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='[ ].*$,\1#\2' ac_dC=' ' ac_dD=',;t' # ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='$,\1#\2define\3' ac_uC=' ' ac_uD=',;t' for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case $ac_file in - | *:- | *:-:* ) # input from stdin cat >$tmp/stdin ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; * ) ac_file_in=$ac_file.in ;; esac test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 echo "$as_me: creating $ac_file" >&6;} # First look for the input files in the build tree, otherwise in the # src tree. ac_file_inputs=`IFS=: for f in $ac_file_in; do case $f in -) echo $tmp/stdin ;; [\\/$]*) # Absolute (can't be DOS-style, as IFS=:) test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } # Do quote $f, to prevent DOS paths from being IFS'd. echo "$f";; *) # Relative if test -f "$f"; then # Build tree echo "$f" elif test -f "$srcdir/$f"; then # Source tree echo "$srcdir/$f" else # /dev/null tree { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 echo "$as_me: error: cannot find input file: $f" >&2;} { (exit 1); exit 1; }; } fi;; esac done` || { (exit 1); exit 1; } # Remove the trailing spaces. sed 's/[ ]*$//' $ac_file_inputs >$tmp/in # Handle all the #define templates only if necessary. if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then # If there are no defines, we may have an empty if/fi : cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/defines.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in fi # grep # Handle all the #undef templates cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in cat >$tmp/undefs.sed <$tmp/out rm -f $tmp/in mv $tmp/out $tmp/in # Let's still pretend it is `configure' which instantiates (i.e., don't # use $as_me), people would be surprised to read: # /* config.h. Generated by config.status. */ if test x"$ac_file" = x-; then echo "/* Generated by configure. */" >$tmp/config.h else echo "/* $ac_file. Generated by configure. */" >$tmp/config.h fi cat $tmp/in >>$tmp/config.h rm -f $tmp/in if test x"$ac_file" != x-; then if diff $ac_file $tmp/config.h >/dev/null 2>&1; then { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 echo "$as_me: $ac_file is unchanged" >&6;} else ac_dir=`(dirname "$ac_file") 2>/dev/null || $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_file" : 'X\(//\)[^/]' \| \ X"$ac_file" : 'X\(//\)$' \| \ X"$ac_file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } rm -f $ac_file mv $tmp/config.h $ac_file fi else cat $tmp/config.h rm -f $tmp/config.h fi # Compute $ac_file's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $ac_file | $ac_file:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X$ac_file : 'X\(//\)[^/]' \| \ X$ac_file : 'X\(//\)$' \| \ X$ac_file : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X$ac_file | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'`/stamp-h$_am_stamp_count done # # CONFIG_COMMANDS section. # for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue ac_dest=`echo "$ac_file" | sed 's,:.*,,'` ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` ac_dir=`(dirname "$ac_dest") 2>/dev/null || $as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$ac_dest" : 'X\(//\)[^/]' \| \ X"$ac_dest" : 'X\(//\)$' \| \ X"$ac_dest" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$ac_dest" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p "$ac_dir" else as_dir="$ac_dir" as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} { (exit 1); exit 1; }; }; } ac_builddir=. if test "$ac_dir" != .; then ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` # A "../" for each directory in $ac_dir_suffix. ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` else ac_dir_suffix= ac_top_builddir= fi case $srcdir in .) # No --srcdir option. We are building in place. ac_srcdir=. if test -z "$ac_top_builddir"; then ac_top_srcdir=. else ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` fi ;; [\\/]* | ?:[\\/]* ) # Absolute path. ac_srcdir=$srcdir$ac_dir_suffix; ac_top_srcdir=$srcdir ;; *) # Relative path. ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix ac_top_srcdir=$ac_top_builddir$srcdir ;; esac # Do not use `cd foo && pwd` to compute absolute paths, because # the directories may not exist. case `pwd` in .) ac_abs_builddir="$ac_dir";; *) case "$ac_dir" in .) ac_abs_builddir=`pwd`;; [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; *) ac_abs_builddir=`pwd`/"$ac_dir";; esac;; esac case $ac_abs_builddir in .) ac_abs_top_builddir=${ac_top_builddir}.;; *) case ${ac_top_builddir}. in .) ac_abs_top_builddir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; esac;; esac case $ac_abs_builddir in .) ac_abs_srcdir=$ac_srcdir;; *) case $ac_srcdir in .) ac_abs_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; esac;; esac case $ac_abs_builddir in .) ac_abs_top_srcdir=$ac_top_srcdir;; *) case $ac_top_srcdir in .) ac_abs_top_srcdir=$ac_abs_builddir;; [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; esac;; esac { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 echo "$as_me: executing $ac_dest commands" >&6;} case $ac_dest in depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # So let's grep whole file. if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then dirpart=`(dirname "$mf") 2>/dev/null || $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$mf" : 'X\(//\)[^/]' \| \ X"$mf" : 'X\(//\)$' \| \ X"$mf" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`(dirname "$file") 2>/dev/null || $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$file" : 'X\(//\)[^/]' \| \ X"$file" : 'X\(//\)$' \| \ X"$file" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$file" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` { if $as_mkdir_p; then mkdir -p $dirpart/$fdir else as_dir=$dirpart/$fdir as_dirs= while test ! -d "$as_dir"; do as_dirs="$as_dir $as_dirs" as_dir=`(dirname "$as_dir") 2>/dev/null || $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ X"$as_dir" : 'X\(//\)[^/]' \| \ X"$as_dir" : 'X\(//\)$' \| \ X"$as_dir" : 'X\(/\)' \| \ . : '\(.\)' 2>/dev/null || echo X"$as_dir" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } /^X\(\/\/\)[^/].*/{ s//\1/; q; } /^X\(\/\/\)$/{ s//\1/; q; } /^X\(\/\).*/{ s//\1/; q; } s/.*/./; q'` done test ! -n "$as_dirs" || mkdir $as_dirs fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} { (exit 1); exit 1; }; }; } # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ;; libtool ) # See if we are running on zsh, and set the options which allow our # commands through without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi cfgfile="${ofile}T" trap "$RM \"$cfgfile\"; exit 1" 1 2 15 $RM "$cfgfile" cat <<_LT_EOF >> "$cfgfile" #! $SHELL # `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $as_me (GNU $PACKAGE$TIMESTAMP) $VERSION # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, # 2006 Free Software Foundation, Inc. # # This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # TEST SUITE MARKER ## BEGIN SOURCABLE # The names of the tagged configurations supported by this script. available_tags="" # ### BEGIN LIBTOOL CONFIG # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision # Assembler program. AS=$AS # DLL creation program. DLLTOOL=$DLLTOOL # Object dumper program. OBJDUMP=$OBJDUMP # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # What type of objects to build. pic_mode=$pic_mode # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="\$SED -e 1s/^X//" # A grep program that handles long lines. GREP=$lt_GREP # An ERE matcher. EGREP=$lt_EGREP # A literal string matcher. FGREP=$lt_FGREP # A BSD- or MS-compatible name lister. NM=$lt_NM # Whether we need soft or hard links. LN_S=$lt_LN_S # What is the maximum length of a command? max_cmd_len=$max_cmd_len # Object file suffix (normally "o"). objext=$ac_objext # Executable file suffix (normally ""). exeext=$exeext # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == "file_magic". file_magic_cmd=$lt_file_magic_cmd # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A symbol stripping program. STRIP=$lt_STRIP # Commands used to install an old-style archive. RANLIB=$lt_RANLIB old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # A C compiler. LTCC=$lt_CC # LTCC compiler flags. LTCFLAGS=$lt_CFLAGS # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration. global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair. global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # The name of the directory that contains temporary libtool files. objdir=$objdir # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # An echo program that does not interpret backslashes. ECHO=$lt_ECHO # Used to examine libraries when file_magic_cmd begins with "file". MAGIC_CMD=$MAGIC_CMD # Must we lock files when doing compilation? need_locks=$lt_need_locks # Old archive suffix (normally "a"). libext=$libext # Shared library suffix (normally ".so"). shrext_cmds=$lt_shrext_cmds # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Variables whose values should be saved in libtool wrapper scripts and # restored at link time. variables_saved_for_relink=$lt_variables_saved_for_relink # Do we need the "lib" prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Library versioning type. version_type=$version_type # Shared library runtime path variable. runpath_var=$runpath_var # Shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Command to use after installation of a shared archive. postinstall_cmds=$lt_postinstall_cmds # Command to use after uninstallation of a shared archive. postuninstall_cmds=$lt_postuninstall_cmds # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # As "finish_cmds", except a single script fragment to be evaled but # not shown. finish_eval=$lt_finish_eval # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Compile-time system search path for libraries. sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries. sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # The linker used to build libraries. LD=$lt_LD # Commands used to build an old-style archive. old_archive_cmds=$lt_old_archive_cmds # A language specific compiler. CC=$lt_compiler # Is the compiler the GNU compiler? with_gcc=$GCC # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag # How to pass a linker flag through the compiler. wl=$lt_lt_prog_compiler_wl # Additional compiler flags for building library objects. pic_flag=$lt_lt_prog_compiler_pic # Compiler flag to prevent dynamic linking. link_static_flag=$lt_lt_prog_compiler_static # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_lt_cv_prog_compiler_c_o # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$archive_cmds_need_lc # Whether or not to disallow shared libs when runtime libs are static. allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_export_dynamic_flag_spec # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_whole_archive_flag_spec # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_old_archive_from_new_cmds # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds # Commands used to build a shared archive. archive_cmds=$lt_archive_cmds archive_expsym_cmds=$lt_archive_expsym_cmds # Commands used to build a loadable module if different from building # a shared archive. module_cmds=$lt_module_cmds module_expsym_cmds=$lt_module_expsym_cmds # Whether we are building with GNU ld or not. with_gnu_ld=$lt_with_gnu_ld # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_allow_undefined_flag # Flag that enforces no undefined symbols. no_undefined_flag=$lt_no_undefined_flag # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec # If ld is used when linking, flag to hardcode \$libdir into a binary # during linking. This must work even if \$libdir does not exist. hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator # Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes # DIR into the resulting binary. hardcode_direct=$hardcode_direct # Set to "yes" if using the -LDIR flag during linking hardcodes DIR # into the resulting binary. hardcode_minus_L=$hardcode_minus_L # Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR # into the resulting binary. hardcode_shlibpath_var=$hardcode_shlibpath_var # Set to "yes" if building a shared library automatically hardcodes DIR # into the library and all subsequent libraries and executables linked # against it. hardcode_automatic=$hardcode_automatic # Set to yes if linker adds runtime paths of dependent libraries # to runtime path list. inherit_rpath=$inherit_rpath # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$link_all_deplibs # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to "yes" if exported symbols are required. always_export_symbols=$always_export_symbols # The commands to list exported symbols. export_symbols_cmds=$lt_export_symbols_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_exclude_expsyms # Symbols that must always be exported. include_expsyms=$lt_include_expsyms # Commands necessary for linking programs (against libraries) with templates. prelink_cmds=$lt_prelink_cmds # Specify filename containing input files. file_list_spec=$lt_file_list_spec # How to hardcode a shared library path into an executable. hardcode_action=$hardcode_action # ### END LIBTOOL CONFIG # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH _LT_EOF case $host_os in aix3*) cat <<\_LT_EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi _LT_EOF ;; esac ltmain="$ac_aux_dir/ltmain.sh" # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) case $xsi_shell in yes) cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { case ${1} in */*) func_dirname_result="${1%/*}${2}" ;; * ) func_dirname_result="${3}" ;; esac } # func_basename file func_basename () { func_basename_result="${1##*/}" } # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). func_stripname () { # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are # positional parameters, so assign one to ordinary parameter first. func_stripname_result=${3} func_stripname_result=${func_stripname_result#"${1}"} func_stripname_result=${func_stripname_result%"${2}"} } _LT_EOF ;; *) # Bourne compatible functions. cat << \_LT_EOF >> "$cfgfile" # func_dirname file append nondir_replacement # Compute the dirname of FILE. If nonempty, add APPEND to the result, # otherwise set result to NONDIR_REPLACEMENT. func_dirname () { # Extract subdirectory from the argument. func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` if test "X$func_dirname_result" = "X${1}"; then func_dirname_result="${3}" else func_dirname_result="$func_dirname_result${2}" fi } # func_basename file func_basename () { func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` } # func_stripname prefix suffix name # strip PREFIX and SUFFIX off of NAME. # PREFIX and SUFFIX must not contain globbing or regex special # characters, hashes, percent signs, but SUFFIX may contain a leading # dot (in which case that matches only a dot). # func_strip_suffix prefix name func_stripname () { case ${2} in .*) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; *) func_stripname_result=`$ECHO "X${3}" \ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; esac } _LT_EOF esac sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ;; esac done { (exit 0); exit 0; }