# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# -*- mode: makefile -*-
####################################
# Everything below here is generic #
####################################
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/version.xml.in $(top_srcdir)/gtk-doc.make
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/gtk-doc.m4 \
$(top_srcdir)/m4/intltool.m4 $(top_srcdir)/m4/python.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/gsf-config.h
CONFIG_CLEAN_FILES = version.xml
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(manpagedir)"
manpageDATA_INSTALL = $(INSTALL_DATA)
DATA = $(manpage_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
ACLOCAL_AMFLAGS = @ACLOCAL_AMFLAGS@
ALL_LINGUAS = @ALL_LINGUAS@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BZ2_LIBS = @BZ2_LIBS@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CURRENT_MINUS_AGE = @CURRENT_MINUS_AGE@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@
FFLAGS = @FFLAGS@
GCONFTOOL = @GCONFTOOL@
GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
GTKDOC_CHECK = @GTKDOC_CHECK@
HTML_DIR = @HTML_DIR@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLLIBS = @INTLLIBS@
INTLTOOL_CAVES_RULE = @INTLTOOL_CAVES_RULE@
INTLTOOL_DESKTOP_RULE = @INTLTOOL_DESKTOP_RULE@
INTLTOOL_DIRECTORY_RULE = @INTLTOOL_DIRECTORY_RULE@
INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
INTLTOOL_KBD_RULE = @INTLTOOL_KBD_RULE@
INTLTOOL_KEYS_RULE = @INTLTOOL_KEYS_RULE@
INTLTOOL_MERGE = @INTLTOOL_MERGE@
INTLTOOL_OAF_RULE = @INTLTOOL_OAF_RULE@
INTLTOOL_PERL = @INTLTOOL_PERL@
INTLTOOL_POLICY_RULE = @INTLTOOL_POLICY_RULE@
INTLTOOL_PONG_RULE = @INTLTOOL_PONG_RULE@
INTLTOOL_PROP_RULE = @INTLTOOL_PROP_RULE@
INTLTOOL_SCHEMAS_RULE = @INTLTOOL_SCHEMAS_RULE@
INTLTOOL_SERVER_RULE = @INTLTOOL_SERVER_RULE@
INTLTOOL_SERVICE_RULE = @INTLTOOL_SERVICE_RULE@
INTLTOOL_SHEET_RULE = @INTLTOOL_SHEET_RULE@
INTLTOOL_SOUNDLIST_RULE = @INTLTOOL_SOUNDLIST_RULE@
INTLTOOL_THEME_RULE = @INTLTOOL_THEME_RULE@
INTLTOOL_UI_RULE = @INTLTOOL_UI_RULE@
INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
INTLTOOL_XAM_RULE = @INTLTOOL_XAM_RULE@
INTLTOOL_XML_NOMERGE_RULE = @INTLTOOL_XML_NOMERGE_RULE@
INTLTOOL_XML_RULE = @INTLTOOL_XML_RULE@
LDFLAGS = @LDFLAGS@
LIBEXE = @LIBEXE@
LIBGSF_CFLAGS = @LIBGSF_CFLAGS@
LIBGSF_GNOME_CFLAGS = @LIBGSF_GNOME_CFLAGS@
LIBGSF_GNOME_LIBS = @LIBGSF_GNOME_LIBS@
LIBGSF_GVFS_CFLAGS = @LIBGSF_GVFS_CFLAGS@
LIBGSF_GVFS_LIBS = @LIBGSF_GVFS_LIBS@
LIBGSF_LIBS = @LIBGSF_LIBS@
LIBGSF_MAJOR_VERSION = @LIBGSF_MAJOR_VERSION@
LIBGSF_MICRO_VERSION = @LIBGSF_MICRO_VERSION@
LIBGSF_MINOR_VERSION = @LIBGSF_MINOR_VERSION@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGFMT_OPTS = @MSGFMT_OPTS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
POFILES = @POFILES@
POSUB = @POSUB@
PO_IN_DATADIR_FALSE = @PO_IN_DATADIR_FALSE@
PO_IN_DATADIR_TRUE = @PO_IN_DATADIR_TRUE@
PYGTK_CFLAGS = @PYGTK_CFLAGS@
PYGTK_CODEGEN = @PYGTK_CODEGEN@
PYGTK_LIBS = @PYGTK_LIBS@
PYTHON = @PYTHON@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_INCLUDES = @PYTHON_INCLUDES@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
VERSION_INFO = @VERSION_INFO@
WARN_CFLAGS = @WARN_CFLAGS@
WINDRES = @WINDRES@
XGETTEXT = @XGETTEXT@
Z_CPPFLAGS = @Z_CPPFLAGS@
Z_LIBS = @Z_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
# The name of the module.
DOC_MODULE = gsf
# The top-level SGML file.
DOC_MAIN_SGML_FILE = gsf-docs.sgml
# The directory containing the source code. Relative to $(srcdir)
DOC_SOURCE_DIR = ../gsf
# Extra options to pass to gtkdoc-scangobj
SCANGOBJ_OPTIONS = --nogtkinit --type-init-func="gsf_init ()"
# Extra options to supply to gtkdoc-scan
SCAN_OPTIONS =
# Extra options to supply to gtkdoc-mkdb
MKDB_OPTIONS = --sgml-mode --output-format=xml
# Extra options to supply to gtkdoc-fixref
FIXXREF_OPTIONS =
# Used for dependencies
HFILE_GLOB = $(top_srcdir)/gsf/*.h
CFILE_GLOB = $(top_srcdir)/gsf/*.c
# Header files to ignore when scanning
IGNORE_HFILES = \
biff-types.h \
gsf-command-context.h \
gsf-infile-msvba.h \
gsf-io-context.h \
gsf-output-transaction.h \
gsf-infile-ar.h \
gsf-infile-tar.h \
gsf-infile-tar.c \
gsf-outfile-tar.h \
gsf-outfile-tar.c
EXTRA_HFILES = ../gsf-gnome/*.h
# Images to copy into HTML directory
HTML_IMAGES =
# Extra SGML files that are included by $(DOC_MAIN_SGML_FILE)
content_files =
# Other files to distribute
extra_files =
# CFLAGS and LDFLAGS for compiling scan program. Only needed
# if $(DOC_MODULE).types is non-empty.
GTKDOC_CFLAGS = -I$(top_srcdir) $(LIBGSF_CFLAGS)
GTKDOC_LIBS = $(top_builddir)/gsf/libgsf-1.la $(LIBGSF_LIBS)
manpagedir = $(mandir)/man1
manpage_DATA = gsf-office-thumbnailer.1 gsf.1
@GTK_DOC_INSTALLED_TRUE@@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_INSTALLED_TRUE@@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_CC = $(LIBTOOL) --mode=compile $(CC) $(INCLUDES) $(AM_CFLAGS) $(CFLAGS)
@GTK_DOC_INSTALLED_TRUE@@GTK_DOC_USE_LIBTOOL_FALSE@GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS)
@GTK_DOC_INSTALLED_TRUE@@GTK_DOC_USE_LIBTOOL_TRUE@GTKDOC_LD = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS)
# We set GPATH here; this gives us semantics for GNU make
# which are more like other make's VPATH, when it comes to
# whether a source that is a target of one rule is then
# searched for in VPATH/GPATH.
#
@GTK_DOC_INSTALLED_TRUE@GPATH = $(srcdir)
@GTK_DOC_INSTALLED_TRUE@TARGET_DIR = $(HTML_DIR)/$(DOC_MODULE)
@GTK_DOC_INSTALLED_FALSE@EXTRA_DIST = $(manpage_DATA) \
@GTK_DOC_INSTALLED_FALSE@ developer/blocksize.html
@GTK_DOC_INSTALLED_TRUE@EXTRA_DIST = $(content_files) $(HTML_IMAGES) \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MAIN_SGML_FILE) \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE)-sections.txt \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE)-overrides.txt \
@GTK_DOC_INSTALLED_TRUE@ $(manpage_DATA) \
@GTK_DOC_INSTALLED_TRUE@ developer/blocksize.html
@GTK_DOC_INSTALLED_TRUE@DOC_STAMPS = scan-build.stamp tmpl-build.stamp sgml-build.stamp html-build.stamp \
@GTK_DOC_INSTALLED_TRUE@ $(srcdir)/tmpl.stamp $(srcdir)/sgml.stamp $(srcdir)/html.stamp
@GTK_DOC_INSTALLED_TRUE@SCANOBJ_FILES = \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE).args \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE).hierarchy \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE).interfaces \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE).prerequisites \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE).signals
@GTK_DOC_INSTALLED_TRUE@REPORT_FILES = \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE)-undocumented.txt \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE)-undeclared.txt \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE)-unused.txt
@GTK_DOC_INSTALLED_TRUE@CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_STAMPS) gsf-scan.*
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/gtk-doc.make $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
install-manpageDATA: $(manpage_DATA)
@$(NORMAL_INSTALL)
test -z "$(manpagedir)" || $(MKDIR_P) "$(DESTDIR)$(manpagedir)"
@list='$(manpage_DATA)'; for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
f=$(am__strip_dir) \
echo " $(manpageDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(manpagedir)/$$f'"; \
$(manpageDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(manpagedir)/$$f"; \
done
uninstall-manpageDATA:
@$(NORMAL_UNINSTALL)
@list='$(manpage_DATA)'; for p in $$list; do \
f=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(manpagedir)/$$f'"; \
rm -f "$(DESTDIR)$(manpagedir)/$$f"; \
done
tags: TAGS
TAGS:
ctags: CTAGS
CTAGS:
@GTK_DOC_INSTALLED_FALSE@dist-hook:
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
check-am: all-am
check: check-am
@GTK_DOC_INSTALLED_FALSE@all-local:
all-am: Makefile $(DATA) all-local
installdirs:
for dir in "$(DESTDIR)$(manpagedir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
@GTK_DOC_INSTALLED_FALSE@uninstall-local:
@GTK_DOC_INSTALLED_FALSE@install-data-local:
@GTK_DOC_INSTALLED_FALSE@maintainer-clean-local:
@GTK_DOC_INSTALLED_FALSE@clean-local:
clean: clean-am
clean-am: clean-generic clean-libtool clean-local mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
info: info-am
info-am:
install-data-am: install-data-local install-manpageDATA
install-dvi: install-dvi-am
install-exec-am:
install-html: install-html-am
install-info: install-info-am
install-man:
install-pdf: install-pdf-am
install-ps: install-ps-am
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
maintainer-clean-local
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-local uninstall-manpageDATA
.MAKE: install-am install-strip
.PHONY: all all-am all-local check check-am clean clean-generic \
clean-libtool clean-local dist-hook distclean \
distclean-generic distclean-libtool distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-data-local install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-manpageDATA \
install-pdf install-pdf-am install-ps install-ps-am \
install-strip installcheck installcheck-am installdirs \
maintainer-clean maintainer-clean-generic \
maintainer-clean-local mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
uninstall-local uninstall-manpageDATA
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_INSTALLED_TRUE@all-local: html-build.stamp
@ENABLE_GTK_DOC_FALSE@@GTK_DOC_INSTALLED_TRUE@all-local:
@GTK_DOC_INSTALLED_TRUE@docs: html-build.stamp
#### scan ####
@GTK_DOC_INSTALLED_TRUE@scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB)
@GTK_DOC_INSTALLED_TRUE@ @echo 'gtk-doc: Scanning header files'
@GTK_DOC_INSTALLED_TRUE@ @-chmod -R u+w $(srcdir)
@GTK_DOC_INSTALLED_TRUE@ cd $(srcdir) && \
@GTK_DOC_INSTALLED_TRUE@ gtkdoc-scan --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --ignore-headers="$(IGNORE_HFILES)" $(SCAN_OPTIONS) $(EXTRA_HFILES)
@GTK_DOC_INSTALLED_TRUE@ if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \
@GTK_DOC_INSTALLED_TRUE@ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" CFLAGS="$(GTKDOC_CFLAGS)" LDFLAGS="$(GTKDOC_LIBS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) --module=$(DOC_MODULE) --output-dir=$(srcdir) ; \
@GTK_DOC_INSTALLED_TRUE@ else \
@GTK_DOC_INSTALLED_TRUE@ cd $(srcdir) ; \
@GTK_DOC_INSTALLED_TRUE@ for i in $(SCANOBJ_FILES) ; do \
@GTK_DOC_INSTALLED_TRUE@ test -f $$i || touch $$i ; \
@GTK_DOC_INSTALLED_TRUE@ done \
@GTK_DOC_INSTALLED_TRUE@ fi
@GTK_DOC_INSTALLED_TRUE@ touch scan-build.stamp
@GTK_DOC_INSTALLED_TRUE@$(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp
@GTK_DOC_INSTALLED_TRUE@ @true
#### templates ####
@GTK_DOC_INSTALLED_TRUE@tmpl-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt
@GTK_DOC_INSTALLED_TRUE@ @echo 'gtk-doc: Rebuilding template files'
@GTK_DOC_INSTALLED_TRUE@ @-chmod -R u+w $(srcdir)
@GTK_DOC_INSTALLED_TRUE@ cd $(srcdir) && gtkdoc-mktmpl --module=$(DOC_MODULE) $(MKTMPL_OPTIONS)
@GTK_DOC_INSTALLED_TRUE@ touch tmpl-build.stamp
@GTK_DOC_INSTALLED_TRUE@tmpl.stamp: tmpl-build.stamp
@GTK_DOC_INSTALLED_TRUE@ @true
@GTK_DOC_INSTALLED_TRUE@tmpl/*.sgml:
@GTK_DOC_INSTALLED_TRUE@ @true
#### xml ####
@GTK_DOC_INSTALLED_TRUE@sgml-build.stamp: tmpl.stamp $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-sections.txt $(srcdir)/tmpl/*.sgml $(expand_content_files)
@GTK_DOC_INSTALLED_TRUE@ @echo 'gtk-doc: Building XML'
@GTK_DOC_INSTALLED_TRUE@ @-chmod -R u+w $(srcdir)
@GTK_DOC_INSTALLED_TRUE@ cd $(srcdir) && \
@GTK_DOC_INSTALLED_TRUE@ gtkdoc-mkdb --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR) --output-format=xml --expand-content-files="$(expand_content_files)" --main-sgml-file=$(DOC_MAIN_SGML_FILE) $(MKDB_OPTIONS)
@GTK_DOC_INSTALLED_TRUE@ touch sgml-build.stamp
@GTK_DOC_INSTALLED_TRUE@sgml.stamp: sgml-build.stamp
@GTK_DOC_INSTALLED_TRUE@ @true
#### html ####
@GTK_DOC_INSTALLED_TRUE@html-build.stamp: sgml.stamp $(DOC_MAIN_SGML_FILE) $(content_files)
@GTK_DOC_INSTALLED_TRUE@ @echo 'gtk-doc: Building HTML'
@GTK_DOC_INSTALLED_TRUE@ @-chmod -R u+w $(srcdir)
@GTK_DOC_INSTALLED_TRUE@ rm -rf $(srcdir)/html
@GTK_DOC_INSTALLED_TRUE@ mkdir $(srcdir)/html
@GTK_DOC_INSTALLED_TRUE@ cd $(srcdir)/html && gtkdoc-mkhtml $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
@GTK_DOC_INSTALLED_TRUE@ test "x$(HTML_IMAGES)" = "x" || ( cd $(srcdir) && cp $(HTML_IMAGES) html )
@GTK_DOC_INSTALLED_TRUE@ @echo 'gtk-doc: Fixing cross-references'
@GTK_DOC_INSTALLED_TRUE@ cd $(srcdir) && gtkdoc-fixxref --module-dir=html --html-dir=$(HTML_DIR) $(FIXXREF_OPTIONS)
@GTK_DOC_INSTALLED_TRUE@ touch html-build.stamp
##############
@GTK_DOC_INSTALLED_TRUE@clean-local:
@GTK_DOC_INSTALLED_TRUE@ rm -f *~ *.bak
@GTK_DOC_INSTALLED_TRUE@ rm -rf .libs
@GTK_DOC_INSTALLED_TRUE@maintainer-clean-local: clean
@GTK_DOC_INSTALLED_TRUE@ cd $(srcdir) && rm -rf xml html \
@GTK_DOC_INSTALLED_TRUE@ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt $(REPORT_FILES)
@GTK_DOC_INSTALLED_TRUE@install-data-local:
@GTK_DOC_INSTALLED_TRUE@ installfiles=`echo $(srcdir)/html/*`; \
@GTK_DOC_INSTALLED_TRUE@ if test "$$installfiles" = '$(srcdir)/html/*'; \
@GTK_DOC_INSTALLED_TRUE@ then echo '-- Nothing to install' ; \
@GTK_DOC_INSTALLED_TRUE@ else \
@GTK_DOC_INSTALLED_TRUE@ $(mkinstalldirs) $(DESTDIR)$(TARGET_DIR); \
@GTK_DOC_INSTALLED_TRUE@ for i in $$installfiles; do \
@GTK_DOC_INSTALLED_TRUE@ echo '-- Installing '$$i ; \
@GTK_DOC_INSTALLED_TRUE@ $(INSTALL_DATA) $$i $(DESTDIR)$(TARGET_DIR); \
@GTK_DOC_INSTALLED_TRUE@ done; \
@GTK_DOC_INSTALLED_TRUE@ echo '-- Installing $(srcdir)/html/index.sgml' ; \
@GTK_DOC_INSTALLED_TRUE@ $(INSTALL_DATA) $(srcdir)/html/index.sgml $(DESTDIR)$(TARGET_DIR) || :; \
@GTK_DOC_INSTALLED_TRUE@ fi
@GTK_DOC_INSTALLED_TRUE@ -gtkdoc-rebase --relative --destdir=$(DESTDIR) --html-dir=$(DESTDIR)$(TARGET_DIR)
@GTK_DOC_INSTALLED_TRUE@uninstall-local:
@GTK_DOC_INSTALLED_TRUE@ rm -f $(DESTDIR)$(TARGET_DIR)/*
#
# Require gtk-doc when making dist
#
@ENABLE_GTK_DOC_TRUE@@GTK_DOC_INSTALLED_TRUE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@@GTK_DOC_INSTALLED_TRUE@dist-check-gtkdoc:
@ENABLE_GTK_DOC_FALSE@@GTK_DOC_INSTALLED_TRUE@ @echo "*** gtk-doc must be installed and enabled in order to make dist"
@ENABLE_GTK_DOC_FALSE@@GTK_DOC_INSTALLED_TRUE@ @false
@GTK_DOC_INSTALLED_TRUE@dist-hook: dist-check-gtkdoc dist-hook-local
@GTK_DOC_INSTALLED_TRUE@ mkdir $(distdir)/tmpl
@GTK_DOC_INSTALLED_TRUE@ mkdir $(distdir)/xml
@GTK_DOC_INSTALLED_TRUE@ mkdir $(distdir)/html
@GTK_DOC_INSTALLED_TRUE@ -cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl
@GTK_DOC_INSTALLED_TRUE@ -cp $(srcdir)/xml/*.xml $(distdir)/xml
@GTK_DOC_INSTALLED_TRUE@ cp $(srcdir)/html/* $(distdir)/html
@GTK_DOC_INSTALLED_TRUE@ if test -f $(srcdir)/$(DOC_MODULE).types; then \
@GTK_DOC_INSTALLED_TRUE@ cp $(srcdir)/$(DOC_MODULE).types $(distdir)/$(DOC_MODULE).types; \
@GTK_DOC_INSTALLED_TRUE@ fi
@GTK_DOC_INSTALLED_TRUE@ -gtkdoc-rebase --online --relative --html-dir=$(distdir)/html
@GTK_DOC_INSTALLED_TRUE@.PHONY : dist-hook-local docs
@GTK_DOC_INSTALLED_TRUE@.PHONY : dist-hook-local
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
syntax highlighted by Code2HTML, v. 0.9.1