# Makefile.in generated by automake 1.10 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/m4 pkglibdir = $(libdir)/m4 pkgincludedir = $(includedir)/m4 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86-apple-darwin8.0.1 host_triplet = x86-apple-darwin8.0.1 subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(top_srcdir)/checks/Makefile.in \ $(top_srcdir)/configure AUTHORS BACKLOG COPYING ChangeLog \ INSTALL NEWS THANKS TODO config.guess config.sub depcomp \ install-sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/absolute-header.m4 \ $(top_srcdir)/m4/alloca.m4 $(top_srcdir)/m4/allocsa.m4 \ $(top_srcdir)/m4/cloexec.m4 $(top_srcdir)/m4/close-stream.m4 \ $(top_srcdir)/m4/closeout.m4 $(top_srcdir)/m4/codeset.m4 \ $(top_srcdir)/m4/config-h.m4 $(top_srcdir)/m4/eealloc.m4 \ $(top_srcdir)/m4/eoverflow.m4 $(top_srcdir)/m4/error.m4 \ $(top_srcdir)/m4/exitfail.m4 $(top_srcdir)/m4/extensions.m4 \ $(top_srcdir)/m4/fatal-signal.m4 $(top_srcdir)/m4/fpending.m4 \ $(top_srcdir)/m4/free.m4 $(top_srcdir)/m4/getopt.m4 \ $(top_srcdir)/m4/gettimeofday.m4 $(top_srcdir)/m4/gl_list.m4 \ $(top_srcdir)/m4/glibc21.m4 $(top_srcdir)/m4/gnulib-common.m4 \ $(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/inline.m4 \ $(top_srcdir)/m4/intmax_t.m4 $(top_srcdir)/m4/inttypes_h.m4 \ $(top_srcdir)/m4/localcharset.m4 \ $(top_srcdir)/m4/longdouble.m4 $(top_srcdir)/m4/longlong.m4 \ $(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \ $(top_srcdir)/m4/mkdtemp.m4 $(top_srcdir)/m4/mkstemp.m4 \ $(top_srcdir)/m4/pathmax.m4 $(top_srcdir)/m4/quotearg.m4 \ $(top_srcdir)/m4/regex.m4 $(top_srcdir)/m4/sig_atomic_t.m4 \ $(top_srcdir)/m4/signalblocking.m4 \ $(top_srcdir)/m4/size_max.m4 $(top_srcdir)/m4/ssize_t.m4 \ $(top_srcdir)/m4/stdarg.m4 $(top_srcdir)/m4/stdbool.m4 \ $(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdint_h.m4 \ $(top_srcdir)/m4/stdio-safer.m4 \ $(top_srcdir)/m4/stdlib-safer.m4 $(top_srcdir)/m4/stdlib_h.m4 \ $(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/sys_stat_h.m4 \ $(top_srcdir)/m4/sys_time_h.m4 $(top_srcdir)/m4/tempname.m4 \ $(top_srcdir)/m4/tmpdir.m4 $(top_srcdir)/m4/ulonglong.m4 \ $(top_srcdir)/m4/unistd-safer.m4 $(top_srcdir)/m4/unistd_h.m4 \ $(top_srcdir)/m4/unlocked-io.m4 $(top_srcdir)/m4/vasnprintf.m4 \ $(top_srcdir)/m4/vasprintf.m4 $(top_srcdir)/m4/wchar.m4 \ $(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype.m4 \ $(top_srcdir)/m4/wint_t.m4 $(top_srcdir)/m4/xalloc.m4 \ $(top_srcdir)/m4/xsize.m4 $(top_srcdir)/m4/xvasprintf.m4 \ $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/lib/config.h CONFIG_CLEAN_FILES = checks/Makefile SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print ABSOLUTE_STDINT_H = "///usr/include/gcc/darwin/3.3/stdint.h" ABSOLUTE_STDLIB_H = "///usr/include/stdlib.h" ABSOLUTE_SYS_STAT_H = "///usr/include/sys/stat.h" ABSOLUTE_SYS_TIME_H = "///usr/include/sys/time.h" ABSOLUTE_UNISTD_H = "///usr/include/unistd.h" ABSOLUTE_WCHAR_H = ABSOLUTE_WCTYPE_H = "///usr/include/wctype.h" ACLOCAL = ${SHELL} /usr/ports/devel/m4/work/m4-1.4.9/missing --run aclocal-1.10 ALLOCA = ALLOCA_H = alloca.h AMTAR = ${SHELL} /usr/ports/devel/m4/work/m4-1.4.9/missing --run tar AUTOCONF = ${SHELL} /usr/ports/devel/m4/work/m4-1.4.9/missing --run autoconf AUTOHEADER = ${SHELL} /usr/ports/devel/m4/work/m4-1.4.9/missing --run autoheader AUTOMAKE = ${SHELL} /usr/ports/devel/m4/work/m4-1.4.9/missing --run automake-1.10 AWK = gawk BITSIZEOF_PTRDIFF_T = 32 BITSIZEOF_SIG_ATOMIC_T = 32 BITSIZEOF_SIZE_T = 32 BITSIZEOF_WCHAR_T = 32 BITSIZEOF_WINT_T = 32 CC = cc -std=gnu99 CCDEPMODE = depmode=gcc3 CFLAGS = -O -pipe CPP = cc -E CPPFLAGS = CYGPATH_W = echo DEFS = DEPDIR = .deps ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E EOVERFLOW = EXEEXT = GETOPT_H = getopt.h GLIBC21 = no GNULIB_CHOWN = 0 GNULIB_DUP2 = 0 GNULIB_FCHDIR = 0 GNULIB_FTRUNCATE = 0 GNULIB_GETCWD = 0 GNULIB_GETLOGIN_R = 0 GNULIB_GETSUBOPT = 0 GNULIB_MKDTEMP = 1 GNULIB_MKSTEMP = 1 GNULIB_READLINK = 0 GREP = /usr/bin/grep HAVE_DECL_GETLOGIN_R = 1 HAVE_DUP2 = 1 HAVE_FTRUNCATE = 1 HAVE_GETSUBOPT = 1 HAVE_INTTYPES_H = 1 HAVE_LONG_LONG_INT = 1 HAVE_MKDTEMP = 1 HAVE_READLINK = 1 HAVE_SIGNED_SIG_ATOMIC_T = 1 HAVE_SIGNED_WCHAR_T = 1 HAVE_SIGNED_WINT_T = 1 HAVE_STDINT_H = 1 HAVE_STRUCT_TIMEVAL = 1 HAVE_SYS_BITYPES_H = 0 HAVE_SYS_INTTYPES_H = 0 HAVE_SYS_TIME_H = 1 HAVE_SYS_TYPES_H = 1 HAVE_UNISTD_H = 1 HAVE_UNSIGNED_LONG_LONG_INT = 1 HAVE_WCTYPE_H = 1 HAVE_WINT_T = 1 HAVE__BOOL = 1 INSTALL = /usr/bin/install -c -o root -g wheel INSTALL_DATA = install -o root -g wheel -m 444 INSTALL_PROGRAM = install -s -o root -g wheel -m 555 INSTALL_SCRIPT = install -o root -g wheel -m 555 INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LDFLAGS = LIBM4_LIBDEPS = LIBM4_LTLIBDEPS = LIBOBJS = LIBS = LTLIBOBJS = M4_LIBOBJS = __fpending.o asnprintf.o cloexec.o close-stream.o closeout.o dup-safer.o error.o exitfail.o fd-safer.o fopen-safer.o getopt.o getopt1.o mkstemp-safer.o obstack.o pipe-safer.o printf-args.o printf-parse.o quotearg.o regex.o tempname.o vasnprintf.o xmalloc.o M4_LTLIBOBJS = __fpending.lo asnprintf.lo cloexec.lo close-stream.lo closeout.lo dup-safer.lo error.lo exitfail.lo fd-safer.lo fopen-safer.lo getopt.lo getopt1.lo mkstemp-safer.lo obstack.lo pipe-safer.lo printf-args.lo printf-parse.lo quotearg.lo regex.lo tempname.lo vasnprintf.lo xmalloc.lo MAKEINFO = /usr/local/bin/makeinfo --no-split MKDIR_P = /usr/local/bin/mkdir -p OBJEXT = o PACKAGE = m4 PACKAGE_BUGREPORT = bug-m4@gnu.org PACKAGE_NAME = GNU M4 PACKAGE_STRING = GNU M4 1.4.9 PACKAGE_TARNAME = m4 PACKAGE_VERSION = 1.4.9 PATH_SEPARATOR = : PTRDIFF_T_SUFFIX = RANLIB = ranlib REPLACE_CHOWN = 0 REPLACE_FCHDIR = 0 REPLACE_GETCWD = 0 REPLACE_GETTIMEOFDAY = 0 REPLACE_MKSTEMP = 0 SET_MAKE = SHELL = /bin/sh SIG_ATOMIC_T_SUFFIX = SIZE_T_SUFFIX = ul STDBOOL_H = STDINT_H = stdint.h STRIP = SYS_STAT_H = sys/stat.h SYS_TIME_H = VERSION = 1.4.9 WCHAR_H = WCHAR_T_SUFFIX = WCTYPE_H = WINT_T_SUFFIX = abs_builddir = /usr/ports/devel/m4/work/m4-1.4.9 abs_srcdir = /usr/ports/devel/m4/work/m4-1.4.9 abs_top_builddir = /usr/ports/devel/m4/work/m4-1.4.9 abs_top_srcdir = /usr/ports/devel/m4/work/m4-1.4.9 ac_ct_CC = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = x86-apple-darwin8.0.1 build_alias = x86-apple-darwin8.0.1 build_cpu = x86 build_os = darwin8.0.1 build_vendor = apple builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86-apple-darwin8.0.1 host_alias = x86-apple-darwin8.0.1 host_cpu = x86 host_os = darwin8.0.1 host_vendor = apple htmldir = ${docdir} includedir = ${prefix}/include infodir = /usr/local/info/ install_sh = $(SHELL) /usr/ports/devel/m4/work/m4-1.4.9/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = /usr/local/man mkdir_p = /usr/local/bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr/local program_transform_name = s&^&g& psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target_alias = x86-apple-darwin8.0.1 top_builddir = . top_srcdir = . SUBDIRS = . examples lib src doc checks EXTRA_DIST = bootstrap c-boxes.el gendocs.sh GNUmakefile Makefile.maint \ m4/gnulib-cache.m4 DISTCLEANFILES = stamp-h MAINTAINERCLEANFILES = COPYING INSTALL Makefile.in aclocal.m4 \ config-h.in configure depcomp doc/fdl.texi gendocs.sh install-sh \ lib/[a-z]* m4/[a-fh-z]* m4/g[a-mo-z]* m4/gnulib-comp.m4 \ m4/gnulib-tool.m4 missing stamp-h.in ACLOCAL_AMFLAGS = -I m4 DISTCHECK_CONFIGURE_FLAGS = --enable-changeword all: all-recursive .SUFFIXES: am--refresh: @: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ cd $(srcdir) && $(AUTOMAKE) --gnu \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(top_srcdir)/configure: $(am__configure_deps) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) checks/Makefile: $(top_builddir)/config.status $(top_srcdir)/checks/Makefile.in cd $(top_builddir) && $(SHELL) ./config.status $@ # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) $(am__remove_distdir) test -d $(distdir) || mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) dist-tarZ: distdir tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z $(am__remove_distdir) dist-shar: distdir shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz $(am__remove_distdir) dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__remove_distdir) dist dist-all: distdir tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile installdirs: installdirs-recursive installdirs-am: install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES) clean: clean-recursive clean-am: clean-generic mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-dvi: install-dvi-recursive install-exec-am: install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am am--refresh check check-am clean clean-generic \ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ dist-shar dist-tarZ dist-zip distcheck distclean \ distclean-generic distclean-tags distcleancheck distdir \ distuninstallcheck dvi dvi-am html html-am info info-am \ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ installdirs-am maintainer-clean maintainer-clean-generic \ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am tags \ tags-recursive uninstall uninstall-am # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: