#! /bin/sh # Generated automatically by configure. # Run this file to recreate the current configuration. # This directory was configured as follows, # on host darwintel: # # ./configure --host=i386-unknown-gnu --target=msp430 --prefix=/usr/local --cache-file=../../config.cache --srcdir=. # # Compiler output produced by configure, useful for debugging # configure, is in ./config.log if it exists. ac_cs_usage="Usage: ./config.status [--recheck] [--version] [--help]" for ac_option do case "$ac_option" in -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) echo "running ${CONFIG_SHELL-/bin/sh} ./configure --host=i386-unknown-gnu --target=msp430 --prefix=/usr/local --cache-file=../../config.cache --srcdir=. --no-create --no-recursion" exec ${CONFIG_SHELL-/bin/sh} ./configure --host=i386-unknown-gnu --target=msp430 --prefix=/usr/local --cache-file=../../config.cache --srcdir=. --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) echo "./config.status generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "$ac_cs_usage"; exit 0 ;; *) echo "$ac_cs_usage"; exit 1 ;; esac done ac_given_srcdir=. ac_given_INSTALL="../" trap 'rm -fr Makefile.sim Make-common.sim .gdbinit config.h conftest*; exit 1' 1 2 15 # Protect against being on the right side of a sed subst in config.status. sed 's/%@/@@/; s/@%/@@/; s/%g$/@g/; /@g$/s/[\\&%]/\\&/g; s/@@/%@/; s/@@/@%/; s/@g$/%g/' > conftest.subs <<\CEOF /^[ ]*VPATH[ ]*=[^:]*$/d s%@sim_environment@%%g s%@sim_alignment@%%g s%@sim_assert@%%g s%@sim_bitsize@%%g s%@sim_endian@%%g s%@sim_hostendian@%%g s%@sim_float@%%g s%@sim_scache@%%g s%@sim_default_model@%%g s%@sim_hw_cflags@%%g s%@sim_hw_objs@%%g s%@sim_hw@%%g s%@sim_inline@%-DDEFAULT_INLINE=0%g s%@sim_packages@%%g s%@sim_regparm@%%g s%@sim_reserved_bits@%%g s%@sim_smp@%%g s%@sim_stdcall@%%g s%@sim_xor_endian@%%g s%@WARN_CFLAGS@%%g s%@WERROR_CFLAGS@%%g s%@SHELL@%/bin/sh%g s%@CFLAGS@%-fno-common%g s%@CPPFLAGS@%%g s%@CXXFLAGS@%-fno-common%g s%@FFLAGS@%%g s%@DEFS@%-DHAVE_CONFIG_H%g s%@LDFLAGS@%%g s%@LIBS@%%g s%@exec_prefix@%${prefix}%g s%@prefix@%/usr/local%g s%@program_transform_name@%s,^,msp430-,; %g s%@bindir@%${exec_prefix}/bin%g s%@sbindir@%${exec_prefix}/sbin%g s%@libexecdir@%${exec_prefix}/libexec%g s%@datadir@%${prefix}/share%g s%@sysconfdir@%${prefix}/etc%g s%@sharedstatedir@%${prefix}/com%g s%@localstatedir@%${prefix}/var%g s%@libdir@%${exec_prefix}/lib%g s%@includedir@%${prefix}/include%g s%@oldincludedir@%/usr/include%g s%@infodir@%${prefix}/info%g s%@mandir@%${prefix}/man%g s%@host@%i386-unknown-gnu%g s%@host_alias@%i386-unknown-gnu%g s%@host_cpu@%i386%g s%@host_vendor@%unknown%g s%@host_os@%gnu%g s%@target@%msp430-unknown-none%g s%@target_alias@%msp430%g s%@target_cpu@%msp430%g s%@target_vendor@%unknown%g s%@target_os@%none%g s%@build@%i386-unknown-gnu%g s%@build_alias@%i386-unknown-gnu%g s%@build_cpu@%i386%g s%@build_vendor@%unknown%g s%@build_os@%gnu%g s%@CC@%cc%g s%@INSTALL_PROGRAM@%install -s -o root -g wheel -m 555%g s%@INSTALL_SCRIPT@%install -o root -g wheel -m 555%g s%@INSTALL_DATA@%install -o root -g wheel -m 444%g s%@CC_FOR_BUILD@%$(CC)%g s%@HDEFINES@%%g s%@AR@%ar%g s%@RANLIB@%ranlib%g s%@SET_MAKE@%%g s%@CPP@%cc -E%g s%@ALLOCA@%%g s%@USE_NLS@%yes%g s%@MSGFMT@%/usr/local/bin/msgfmt%g s%@GMSGFMT@%/usr/local/bin/msgfmt%g s%@XGETTEXT@%/usr/local/bin/xgettext%g s%@USE_INCLUDED_LIBINTL@%yes%g s%@CATALOGS@%%g s%@CATOBJEXT@%.gmo%g s%@DATADIRNAME@%share%g s%@GMOFILES@%%g s%@INSTOBJEXT@%.mo%g s%@INTLDEPS@%$(top_builddir)/../intl/libintl.a%g s%@INTLLIBS@%$(top_builddir)/../intl/libintl.a%g s%@INTLOBJS@%$(GETTOBJS)%g s%@POFILES@%%g s%@POSUB@%po%g s%@INCLUDE_LOCALE_H@%#include %g s%@GT_NO@%%g s%@GT_YES@%#YES#%g s%@MKINSTALLDIRS@%$(srcdir)/../../mkinstalldirs%g s%@l@%%g s%@MAINT@%#%g s%@sim_bswap@%%g s%@sim_cflags@%%g s%@sim_debug@%%g s%@sim_stdio@%%g s%@sim_trace@%%g s%@sim_profile@%-DPROFILE=1 -DWITH_PROFILE=-1%g s%@EXEEXT@%%g CEOF # Split the substitutions into bite-sized pieces for seds with # small command number limits, like on Digital OSF/1 and HP-UX. ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. ac_file=1 # Number of current file. ac_beg=1 # First line for current file. ac_end=$ac_max_sed_cmds # Line after last line for current file. ac_more_lines=: ac_sed_cmds="" while $ac_more_lines; do if test $ac_beg -gt 1; then sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file else sed "${ac_end}q" conftest.subs > conftest.s$ac_file fi if test ! -s conftest.s$ac_file; then ac_more_lines=false rm -f conftest.s$ac_file else if test -z "$ac_sed_cmds"; then ac_sed_cmds="sed -f conftest.s$ac_file" else ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" fi ac_file=`expr $ac_file + 1` ac_beg=$ac_end ac_end=`expr $ac_end + $ac_max_sed_cmds` fi done if test -z "$ac_sed_cmds"; then ac_sed_cmds=cat fi CONFIG_FILES=${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"} for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dir_suffix. ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dir_suffix= ac_dots= fi case "$ac_given_srcdir" in .) srcdir=. if test -z "$ac_dots"; then top_srcdir=. else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; *) # Relative path. srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" top_srcdir="$ac_dots$ac_given_srcdir" ;; esac case "$ac_given_INSTALL" in [/$]*) INSTALL="$ac_given_INSTALL" ;; *) INSTALL="$ac_dots$ac_given_INSTALL" ;; esac echo creating "$ac_file" rm -f "$ac_file" configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." case "$ac_file" in *Makefile*) ac_comsub="1i\\ # $configure_input" ;; *) ac_comsub= ;; esac ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` sed -e "$ac_comsub s%@configure_input@%$configure_input%g s%@srcdir@%$srcdir%g s%@top_srcdir@%$top_srcdir%g s%@INSTALL@%$INSTALL%g " $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file fi; done rm -f conftest.s* # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where # NAME is the cpp macro being defined and VALUE is the value it is being given. # # ac_d sets the value in "#define NAME VALUE" lines. ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' ac_dC='\3' ac_dD='%g' # ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_uB='\([ ]\)%\1#\2define\3' ac_uC=' ' ac_uD='\4%g' # ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' ac_eB='$%\1#\2define\3' ac_eC=' ' ac_eD='%g' if test "${CONFIG_HEADERS+set}" != set; then CONFIG_HEADERS="config.h:config.in" fi for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". case "$ac_file" in *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; *) ac_file_in="${ac_file}.in" ;; esac echo creating $ac_file rm -f conftest.frag conftest.in conftest.out ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` cat $ac_file_inputs > conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in cat > conftest.frag < conftest.out rm -f conftest.in mv conftest.out conftest.in rm -f conftest.frag conftest.h echo "/* $ac_file. Generated automatically by configure. */" > conftest.h cat conftest.in >> conftest.h rm -f conftest.in if cmp -s $ac_file conftest.h 2>/dev/null; then echo "$ac_file is unchanged" rm -f conftest.h else # Remove last slash and all that follows it. Not all systems have dirname. ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then # The file is in a subdirectory. test ! -d "$ac_dir" && mkdir "$ac_dir" fi rm -f $ac_file mv conftest.h $ac_file fi fi; done ac_sources="../common/tconfig.in ../common/nltvals.def" ac_dests="tconfig.h targ-vals.def" srcdir=$ac_given_srcdir while test -n "$ac_sources"; do set $ac_dests; ac_dest=$1; shift; ac_dests=$* set $ac_sources; ac_source=$1; shift; ac_sources=$* echo "linking $srcdir/$ac_source to $ac_dest" if test ! -r $srcdir/$ac_source; then { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; } fi rm -f $ac_dest # Make relative symlinks. # Remove last slash and all that follows it. Not all systems have dirname. ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'` if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then # The dest file is in a subdirectory. test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir" ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`" # A "../" for each directory in $ac_dest_dir_suffix. ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'` else ac_dest_dir_suffix= ac_dots= fi case "$srcdir" in [/$]*) ac_rel_source="$srcdir/$ac_source" ;; *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;; esac # Make a symlink if possible; otherwise try a hard link. if ln -s $ac_rel_source $ac_dest 2>/dev/null || ln $srcdir/$ac_source $ac_dest; then : else { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } fi done case "x$CONFIG_FILES" in xMakefile*) echo "Merging Makefile.sim+Make-common.sim into Makefile ..." rm -f Makesim1.tmp Makesim2.tmp Makefile sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' Makesim1.tmp sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' Makesim2.tmp sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \ -e '/^## COMMON_POST_/ r Makesim2.tmp' \ Makefile rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp ;; esac case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac exit 0