# Makefile.in generated automatically by automake 1.5 from Makefile.am.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# -*-mode: makefile-*-
#
# Makefile.am
#
# Copyright (c) 2002, Alan Eldridge
# All rights reserved.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions 
# are met:
# 
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 
# * Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
# 
# * Neither the name of the copyright owner nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
# 
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
#
# 2002-12-19 Alan Eldridge <alane@geeksrus.net>
#

SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
AMTAR = @AMTAR@
AWK = @AWK@
BASH = @BASH@
CONFIG_SHELL = @CONFIG_SHELL@
DEPDIR = @DEPDIR@
DVIPS = @DVIPS@
EXEEXT = @EXEEXT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KSH = @KSH@
LATEX = @LATEX@
METAFONT = @METAFONT@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PERL = @PERL@
POD2HTML = @POD2HTML@
POD2LATEX = @POD2LATEX@
POD2MAN = @POD2MAN@
POD2TEXT = @POD2TEXT@
POSIXSHELL = @POSIXSHELL@
RD2 = @RD2@
RDOC = @RDOC@
RELEASENAME = @RELEASENAME@
RUBY = @RUBY@
RUBY_SITELIBDIR = @RUBY_SITELIBDIR@
RUBY_VER = @RUBY_VER@
TEX = @TEX@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@

pkgdocdir = $(datadir)/doc/@PACKAGE@
rdocdir = $(pkgdocdir)/rdoc
man1dir = $(prefix)/man/man1

rdoccpio = rdoc.cpio.gz
man1_DATA = newfile.1
pkgdoc_DATA = newfile.html

#	rm -fr $(DESTDIR)$(rdocdir); true
#	mkdir -p $(DESTDIR)$(rdocdir)
#	gunzip -c $(rdoccpio) | (cd $(DESTDIR)$(pkgdocdir); cpio -idm)
EXTRA_DIST = $(rdoccpio) $(man1_DATA) $(pkgdoc_DATA)
subdir = doc
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_CLEAN_FILES =
DIST_SOURCES =
DATA = $(man1_DATA) $(pkgdoc_DATA)

DIST_COMMON = Makefile.am Makefile.in
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.ac $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  doc/Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && \
	  CONFIG_HEADERS= CONFIG_LINKS= \
	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
uninstall-info-am:
install-man1DATA: $(man1_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(man1dir)/$$f"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(man1dir)/$$f; \
	done

uninstall-man1DATA:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$f"; \
	  rm -f $(DESTDIR)$(man1dir)/$$f; \
	done
install-pkgdocDATA: $(pkgdoc_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(pkgdocdir)
	@list='$(pkgdoc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(pkgdocdir)/$$f"; \
	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(pkgdocdir)/$$f; \
	done

uninstall-pkgdocDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgdoc_DATA)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(pkgdocdir)/$$f"; \
	  rm -f $(DESTDIR)$(pkgdocdir)/$$f; \
	done
tags: TAGS
TAGS:


DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    $(mkinstalldirs) "$(distdir)/$$dir"; \
	  fi; \
	  if test -d $$d/$$file; then \
	    cp -pR $$d/$$file $(distdir) \
	    || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-am
all-am: Makefile $(DATA)

installdirs:
	$(mkinstalldirs) $(DESTDIR)$(man1dir) $(DESTDIR)$(pkgdocdir)

install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic mostlyclean-am

distclean: distclean-am

distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

info: info-am

info-am:

install-data-am: install-man1DATA install-pkgdocDATA
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook

install-exec-am:

install-info: install-info-am

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-am

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic

uninstall-am: uninstall-info-am uninstall-man1DATA uninstall-pkgdocDATA

.PHONY: all all-am check check-am clean clean-generic distclean \
	distclean-generic distdir dvi dvi-am info info-am install \
	install-am install-data install-data-am install-exec \
	install-exec-am install-info install-info-am install-man \
	install-man1DATA install-pkgdocDATA install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	uninstall uninstall-am uninstall-info-am uninstall-man1DATA \
	uninstall-pkgdocDATA


install-data-hook: $(rdoccpio)

#EOF
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: