# Makefile.in generated by automake 1.7.9 from Makefile.am. # Makefile. Generated from Makefile.in by configure. # Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. srcdir = . top_srcdir = . pkgdatadir = $(datadir)/pkg-config pkglibdir = $(prefix)/libdata/pkg-config pkgincludedir = $(includedir)/pkg-config top_builddir = . am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = /usr/bin/install -c -o root -g wheel install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : host_triplet = i386-unknown-gnu ACLOCAL = ${SHELL} /usr/ports/devel/pkg-config/work/pkg-config-0.22/missing --run aclocal-1.7 ALLOCA = AMDEP_FALSE = # AMDEP_TRUE = AMTAR = ${SHELL} /usr/ports/devel/pkg-config/work/pkg-config-0.22/missing --run tar AR = ar AUTOCONF = ${SHELL} /usr/ports/devel/pkg-config/work/pkg-config-0.22/missing --run autoconf AUTOHEADER = ${SHELL} /usr/ports/devel/pkg-config/work/pkg-config-0.22/missing --run autoheader AUTOMAKE = ${SHELL} /usr/ports/devel/pkg-config/work/pkg-config-0.22/missing --run automake-1.7 AWK = gawk CC = cc CCDEPMODE = depmode=gcc3 CFLAGS = -fno-common CPP = cc -E CPPFLAGS = CXX = c++ CXXCPP = c++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -fno-common CYGPATH_W = echo DEFS = -DHAVE_CONFIG_H DEPDIR = .deps ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = /usr/bin/grep -E EXEEXT = F77 = f77 FFLAGS = -g GLIB_CFLAGS = GLIB_LIBS = GREP = /usr/bin/grep INSTALL_DATA = install -o root -g wheel -m 444 INSTALL_PROGRAM = install -s -o root -g wheel -m 555 INSTALL_SCRIPT = install -o root -g wheel -m 555 INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s LDFLAGS = LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = MAINT = # MAINTAINER_MODE_FALSE = MAINTAINER_MODE_TRUE = # MAKEINFO = ${SHELL} /usr/ports/devel/pkg-config/work/pkg-config-0.22/missing --run makeinfo OBJEXT = o PACKAGE = pkg-config PACKAGE_BUGREPORT = PACKAGE_NAME = PACKAGE_STRING = PACKAGE_TARNAME = PACKAGE_VERSION = PATH_SEPARATOR = : PKG_CONFIG = RANLIB = ranlib SET_MAKE = SHELL = /bin/sh STRIP = strip USE_INSTALLED_GLIB_FALSE = USE_INSTALLED_GLIB_TRUE = # VERSION = 0.22 WARN_CFLAGS = ac_ct_CC = ac_ct_CXX = ac_ct_F77 = f77 am__fastdepCC_FALSE = # am__fastdepCC_TRUE = am__fastdepCXX_FALSE = # am__fastdepCXX_TRUE = am__include = include am__leading_dot = . am__quote = bindir = ${exec_prefix}/bin build = i386-unknown-gnu build_alias = i386-unknown-gnu build_cpu = i386 build_os = gnu build_vendor = unknown datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE} dvidir = ${docdir} exec_prefix = ${prefix} host = i386-unknown-gnu host_alias = i386-unknown-gnu host_cpu = i386 host_os = gnu host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = /usr/local/info/ install_sh = /usr/ports/devel/pkg-config/work/pkg-config-0.22/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = /usr/local/man oldincludedir = /usr/include pc_path = /usr/local/libdata/pkgconfig:/usr/local/lib/pkgconfig pdfdir = ${docdir} prefix = /usr/local program_transform_name = s,x,x, psdir = ${docdir} sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com subdirs = glib-1.2.8 sysconfdir = ${prefix}/etc target_alias = i386-unknown-gnu included_glib_includes = -I./glib-1.2.8 #included_glib_includes = pkg_config_LDADD = glib-1.2.8/libglib.la #pkg_config_LDADD = GLIB_SUBDIR = glib-1.2.8 SUBDIRS = $(GLIB_SUBDIR) check m4dir = $(datadir)/aclocal m4_DATA = pkg.m4 man_MANS = pkg-config.1 EXTRA_DIST = $(m4_DATA) $(man_MANS) README.win32 bin_PROGRAMS = pkg-config AM_CFLAGS = INCLUDES = -DPKG_CONFIG_PC_PATH="\"$(pc_path)\"" $(included_glib_includes) pkg_config_SOURCES = \ pkg.h \ pkg.c \ partial-glib.h \ partial-glib.c \ parse.h \ parse.c \ main.c \ findme.c \ findme.h \ popt.c \ popt.h \ poptconfig.c \ popthelp.c \ poptint.h \ poptparse.c subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs CONFIG_HEADER = config.h CONFIG_CLEAN_FILES = bin_PROGRAMS = pkg-config$(EXEEXT) PROGRAMS = $(bin_PROGRAMS) am_pkg_config_OBJECTS = pkg.$(OBJEXT) partial-glib.$(OBJEXT) \ parse.$(OBJEXT) main.$(OBJEXT) findme.$(OBJEXT) popt.$(OBJEXT) \ poptconfig.$(OBJEXT) popthelp.$(OBJEXT) poptparse.$(OBJEXT) pkg_config_OBJECTS = $(am_pkg_config_OBJECTS) #pkg_config_DEPENDENCIES = pkg_config_DEPENDENCIES = \ glib-1.2.8/libglib.la pkg_config_LDFLAGS = DEFAULT_INCLUDES = -I. -I$(srcdir) -I. depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles DEP_FILES = ./$(DEPDIR)/findme.Po ./$(DEPDIR)/main.Po \ ./$(DEPDIR)/parse.Po ./$(DEPDIR)/partial-glib.Po \ ./$(DEPDIR)/pkg.Po ./$(DEPDIR)/popt.Po \ ./$(DEPDIR)/poptconfig.Po ./$(DEPDIR)/popthelp.Po \ ./$(DEPDIR)/poptparse.Po COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \ $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ $(AM_LDFLAGS) $(LDFLAGS) -o $@ DIST_SOURCES = $(pkg_config_SOURCES) NROFF = nroff MANS = $(man_MANS) DATA = $(m4_DATA) RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ ps-recursive install-info-recursive uninstall-info-recursive \ all-recursive install-data-recursive install-exec-recursive \ installdirs-recursive install-recursive uninstall-recursive \ check-recursive installcheck-recursive DIST_COMMON = README $(srcdir)/Makefile.in $(srcdir)/configure AUTHORS \ COPYING ChangeLog INSTALL Makefile.am NEWS acconfig.h \ aclocal.m4 config.guess config.h.in config.sub configure.in \ depcomp install-sh ltmain.sh missing mkinstalldirs DIST_SUBDIRS = glib-1.2.8 check SOURCES = $(pkg_config_SOURCES) all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .c .lo .o .obj am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno $(srcdir)/Makefile.in: # Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) cd $(top_srcdir) && \ $(AUTOMAKE) --gnu Makefile Makefile: # $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) $(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) $(SHELL) ./config.status --recheck $(srcdir)/configure: # $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) $(ACLOCAL_M4): # configure.in cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @if test ! -f $@; then \ rm -f stamp-h1; \ $(MAKE) stamp-h1; \ else :; fi stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status @rm -f stamp-h1 cd $(top_builddir) && $(SHELL) ./config.status config.h $(srcdir)/config.h.in: # $(top_srcdir)/configure.in $(ACLOCAL_M4) $(top_srcdir)/acconfig.h cd $(top_srcdir) && $(AUTOHEADER) touch $(srcdir)/config.h.in distclean-hdr: -rm -f config.h stamp-h1 binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) install-binPROGRAMS: $(bin_PROGRAMS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(bindir) @list='$(bin_PROGRAMS)'; for p in $$list; do \ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ if test -f $$p \ || test -f $$p1 \ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \ else :; fi; \ done uninstall-binPROGRAMS: @$(NORMAL_UNINSTALL) @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ rm -f $(DESTDIR)$(bindir)/$$f; \ done clean-binPROGRAMS: @list='$(bin_PROGRAMS)'; for p in $$list; do \ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ echo " rm -f $$p $$f"; \ rm -f $$p $$f ; \ done pkg-config$(EXEEXT): $(pkg_config_OBJECTS) $(pkg_config_DEPENDENCIES) @rm -f pkg-config$(EXEEXT) $(LINK) $(pkg_config_LDFLAGS) $(pkg_config_OBJECTS) $(pkg_config_LDADD) $(LIBS) mostlyclean-compile: -rm -f *.$(OBJEXT) core *.core distclean-compile: -rm -f *.tab.c include ./$(DEPDIR)/findme.Po include ./$(DEPDIR)/main.Po include ./$(DEPDIR)/parse.Po include ./$(DEPDIR)/partial-glib.Po include ./$(DEPDIR)/pkg.Po include ./$(DEPDIR)/popt.Po include ./$(DEPDIR)/poptconfig.Po include ./$(DEPDIR)/popthelp.Po include ./$(DEPDIR)/poptparse.Po .c.o: if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ fi # source='$<' object='$@' libtool=no \ # depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \ # $(CCDEPMODE) $(depcomp) \ # $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< .c.obj: if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ fi # source='$<' object='$@' libtool=no \ # depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' \ # $(CCDEPMODE) $(depcomp) \ # $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` .c.lo: if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; \ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ fi # source='$<' object='$@' libtool=yes \ # depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' \ # $(CCDEPMODE) $(depcomp) \ # $(LTCOMPILE) -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$< mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs distclean-libtool: -rm -f libtool uninstall-info-am: man1dir = $(mandir)/man1 install-man1: $(man1_MANS) $(man_MANS) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(man1dir) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ else file=$$i; fi; \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \ $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \ done uninstall-man1: @$(NORMAL_UNINSTALL) @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ for i in $$l2; do \ case "$$i" in \ *.1*) list="$$list $$i" ;; \ esac; \ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ case "$$ext" in \ 1*) ;; \ *) ext='1' ;; \ esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \ rm -f $(DESTDIR)$(man1dir)/$$inst; \ done m4DATA_INSTALL = $(INSTALL_DATA) install-m4DATA: $(m4_DATA) @$(NORMAL_INSTALL) $(mkinstalldirs) $(DESTDIR)$(m4dir) @list='$(m4_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " $(m4DATA_INSTALL) $$d$$p $(DESTDIR)$(m4dir)/$$f"; \ $(m4DATA_INSTALL) $$d$$p $(DESTDIR)$(m4dir)/$$f; \ done uninstall-m4DATA: @$(NORMAL_UNINSTALL) @list='$(m4_DATA)'; for p in $$list; do \ f="`echo $$p | sed -e 's|^.*/||'`"; \ echo " rm -f $(DESTDIR)$(m4dir)/$$f"; \ rm -f $(DESTDIR)$(m4dir)/$$f; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" mostlyclean-recursive clean-recursive distclean-recursive \ maintainer-clean-recursive: @set fnord $$MAKEFLAGS; amf=$$2; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ETAGS = etags ETAGSFLAGS = CTAGS = ctags CTAGSFLAGS = tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if (etags --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ else \ include_option=--include; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -f $$subdir/TAGS && \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(ETAGS_ARGS)$$tags$$unique" \ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = . distdir = $(PACKAGE)-$(VERSION) am__remove_distdir = \ { test ! -d $(distdir) \ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -fr $(distdir); }; } GZIP_ENV = --best distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ list='$(DISTFILES)'; for file in $$list; do \ case $$file in \ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ dir="/$$dir"; \ $(mkinstalldirs) "$(distdir)$$dir"; \ else \ dir=''; \ fi; \ if test -d $$d/$$file; then \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d $(distdir)/$$subdir \ || mkdir $(distdir)/$$subdir \ || exit 1; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" \ distdir=../$(distdir)/$$subdir \ distdir) \ || exit 1; \ fi; \ done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r $(distdir) dist-gzip: distdir $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) dist dist-all: distdir $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz $(am__remove_distdir) # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. distcheck: dist $(am__remove_distdir) GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - chmod -R a-w $(distdir); chmod a+w $(distdir) mkdir $(distdir)/_build mkdir $(distdir)/_inst chmod a-w $(distdir) dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ && cd $(distdir)/_build \ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ && chmod -R a-w "$$dc_install_base" \ && ({ \ (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } || { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ && rm -f $(distdir).tar.gz \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @echo "$(distdir).tar.gz is ready for distribution" | \ sed 'h;s/./=/g;p;x;p;x' distuninstallcheck: @cd $(distuninstallcheck_dir) \ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ || { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am check: check-recursive all-am: Makefile $(PROGRAMS) $(MANS) $(DATA) config.h installdirs: installdirs-recursive installdirs-am: $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) $(DESTDIR)$(m4dir) install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: distclean-generic: -rm -f $(CONFIG_CLEAN_FILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf ./$(DEPDIR) -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic distclean-hdr \ distclean-libtool distclean-tags dvi: dvi-recursive dvi-am: info: info-recursive info-am: install-data-am: install-m4DATA install-man install-exec-am: install-binPROGRAMS install-info: install-info-recursive install-man: install-man1 installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf $(top_srcdir)/autom4te.cache -rm -rf ./$(DEPDIR) -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic \ mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-binPROGRAMS uninstall-info-am uninstall-m4DATA \ uninstall-man uninstall-info: uninstall-info-recursive uninstall-man: uninstall-man1 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ clean-binPROGRAMS clean-generic clean-libtool clean-recursive \ ctags ctags-recursive dist dist-all dist-gzip distcheck \ distclean distclean-compile distclean-generic distclean-hdr \ distclean-libtool distclean-recursive distclean-tags \ distcleancheck distdir distuninstallcheck dvi dvi-am \ dvi-recursive info info-am info-recursive install install-am \ install-binPROGRAMS install-data install-data-am \ install-data-recursive install-exec install-exec-am \ install-exec-recursive install-info install-info-am \ install-info-recursive install-m4DATA install-man install-man1 \ install-recursive install-strip installcheck installcheck-am \ installdirs installdirs-am installdirs-recursive \ maintainer-clean maintainer-clean-generic \ maintainer-clean-recursive mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ pdf pdf-am pdf-recursive ps ps-am ps-recursive tags \ tags-recursive uninstall uninstall-am uninstall-binPROGRAMS \ uninstall-info-am uninstall-info-recursive uninstall-m4DATA \ uninstall-man uninstall-man1 uninstall-recursive # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: