/*

  silcbuffer.h 

  Author: Pekka Riikonen <priikone@silcnet.org>

  Copyright (C) 1998 - 2002 Pekka Riikonen

  The contents of this file are subject to one of the Licenses specified 
  in the COPYING file;  You may not use this file except in compliance 
  with the License.

  The software distributed under the License is distributed on an "AS IS"
  basis, in the hope that it will be useful, but WITHOUT WARRANTY OF ANY
  KIND, either expressed or implied.  See the COPYING file for more
  information.

*/
/* $Id: silcbuffer.h,v 1.17.2.3 2003/06/01 08:57:34 priikone Exp $ */
/* Optimized buffer managing routines.  These are short inline functions. */

#ifndef SILCBUFFER_H
#define SILCBUFFER_H

/****h* silcutil/SILC Buffer Interface
 *
 * DESCRIPTION
 *
 *    SilcBuffer is very simple and easy to use, yet you can do to the
 *    buffer almost anything you want with its method functions. The buffer
 *    is constructed of four different data sections that in whole creates
 *    the allocated data area.
 *
 *    This buffer scheme is based on Linux kernel's Socket Buffer, the
 *    idea were taken directly from there and credits should go there.
 *
 ***/

/****s* silcutil/SilcBufferAPI/SilcBuffer
 *
 * NAME
 *
 *    typedef struct { ... } *SilcBuffer, SilcBufferStruct;
 *
 * DESCRIPTION
 *
 *    SILC Buffer object. Following short description of the fields
 *    of the buffer.
 *
 * EXAMPLE
 *
 *    SilcUInt32 truelen;
 *
 *        True length of the buffer. This is set at the allocation of the
 *        buffer and it should not be touched after that. This field should
 *        be considered read-only.
 *
 *    SilcUInt32 len;
 *
 *        Length of the currently valid data area. Tells the length of the
 *        data at the buffer. This is set to zero at the allocation of the
 *        buffer and should not be updated by hand. Method functions of the
 *        buffer automatically updates this field. However, it is not
 *        read-only field and can be updated manually if necessary.
 *
 *    unsiged char *head;
 *
 *        Head of the allocated buffer. This is the start of the allocated
 *        data area and remains as same throughout the lifetime of the buffer.
 *        However, the end of the head area or the start of the currently valid
 *        data area is variable.
 *
 *        --------------------------------
 *        | head  | data         | tail  |
 *        --------------------------------
 *        ^       ^
 *
 *        Current head section in the buffer is sb->data - sb->head.
 *
 *    unsigned char *data;
 *
 *        Currently valid data area. This is the start of the currently valid
 *        main data area. The data area is variable in all directions.
 *
 *        --------------------------------
 *        | head  | data         | tail  |
 *        --------------------------------
 *                ^              ^
 *
 *        Current valid data area in the buffer is sb->tail - sb->data.
 *
 *     unsigned char *tail;
 *
 *        Tail of the buffer. This is the end of the currently valid data area
 *        or start of the tail area. The start of the tail area is variable.
 *
 *        --------------------------------
 *        | head  | data         | tail  |
 *        --------------------------------
 *                               ^       ^
 *
 *        Current tail section in the buffer is sb->end - sb->tail.
 *
 *    unsigned char *end;
 *
 *        End of the allocated buffer. This is the end of the allocated data
 *        area and remains as same throughout the lifetime of the buffer.
 *        Usually this field is not needed except when checking the size
 *        of the buffer.
 *
 *        --------------------------------
 *        | head  | data         | tail  |
 *        --------------------------------
 *                                       ^
 *
 *        Length of the entire buffer is (ie. truelen) sb->end - sb->head.
 *
 *     Currently valid data area is considered to be the main data area in
 *     the buffer. However, the entire buffer is of course valid data and can
 *     be used as such. Usually head section of the buffer includes different
 *     kind of headers or similar. Data section includes the main data of
 *     the buffer. Tail section can be seen as a reserve space of the data
 *     section. Tail section can be pulled towards end, and thus the data
 *     section becomes larger.
 *
 * SOURCE
 */
typedef struct {
  SilcUInt32 truelen;
  SilcUInt32 len;
  unsigned char *head;
  unsigned char *data;
  unsigned char *tail;
  unsigned char *end;
} *SilcBuffer, SilcBufferStruct;
/***/

/* Macros */

/****d* silcutil/SilcBufferAPI/SILC_BUFFER_END
 * 
 * NAME
 *
 *    #define SILC_BUFFER_END(...)
 *
 * DESCRIPTION
 *
 *    Returns the true length of the buffer. This is used to pull
 *    the buffer area to the end of the buffer.
 *
 * SOURCE
 */
#define SILC_BUFFER_END(x) ((x)->end - (x)->head)
/***/

/* Inline functions */

/****f* silcutil/SilcBufferAPI/silc_buffer_alloc
 *
 * SYNOPSIS
 *
 *    static inline
 *    SilcBuffer silc_buffer_alloc(SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Allocates new SilcBuffer and returns it.
 *
 ***/
 
static inline
SilcBuffer silc_buffer_alloc(SilcUInt32 len)
{
  SilcBuffer sb;

  /* Allocate new SilcBuffer */
  sb = (SilcBuffer)silc_calloc(1, sizeof(*sb));
  if (!sb)
    return NULL;

  /* Allocate the actual data area */
  sb->head = (unsigned char *)silc_calloc(len, sizeof(*sb->head));
  if (!sb->head)
    return NULL;

  /* Set pointers to the new buffer */
  sb->truelen = len;
  sb->data = sb->head;
  sb->tail = sb->head;
  sb->end = sb->head + sb->truelen;

  return sb;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_free
 *
 * SYNOPSIS
 *
 *    static inline
 *    void silc_buffer_free(SilcBuffer sb);
 *
 * DESCRIPTION
 *
 *    Frees SilcBuffer.
 *
 ***/

static inline
void silc_buffer_free(SilcBuffer sb)
{
  if (sb) {
#if defined(SILC_DEBUG)
    if (sb->head)
      memset(sb->head, 'F', sb->truelen);
#endif
    silc_free(sb->head);
    silc_free(sb);
  }
}

/****f* silcutil/SilcBufferAPI/silc_buffer_steal
 *
 * SYNOPSIS
 *
 *    static inline
 *    unsigned char *silc_buffer_steal(SilcBuffer sb, SilcUInt32 *data_len);
 *
 * DESCRIPTION
 *
 *    Steals the data from the buffer `sb'.  This returns pointer to the
 *    start of the buffer and the true length of that buffer.  The `sb'
 *    cannot be used anymore after calling this function because the
 *    data buffer was stolen.  The `sb' must be freed with silc_buffer_free.
 *    The caller is responsible of freeing the stolen data buffer with
 *    silc_free.
 *
 ***/

static inline
unsigned char *silc_buffer_steal(SilcBuffer sb, SilcUInt32 *data_len)
{
  unsigned char *buf = sb->head;
  if (data_len)
    *data_len = sb->truelen;
  sb->head = sb->data = sb->tail = sb->end = NULL;
  sb->len = sb->truelen = 0;
  return buf;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_set
 *
 * SYNOPSIS
 *
 *    static inline
 *    void silc_buffer_set(SilcBuffer sb,
 *			   unsigned char *data,
 *                         SilcUInt32 data_len);
 *
 * DESCRIPTION
 *
 *    Sets the `data' and `data_len' to the buffer pointer sent as argument.
 *    The data area is automatically set to the `data_len'. This function
 *    can be used to set the data to static buffer without needing any
 *    memory allocations. The `data' will not be copied to the buffer.
 *
 ***/

static inline
void silc_buffer_set(SilcBuffer sb, unsigned char *data, SilcUInt32 data_len)
{
  sb->data = sb->head = data;
  sb->tail = sb->end = data + data_len;
  sb->len = sb->truelen = data_len;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_pull
 *
 * SYNOPSIS
 *
 *    static inline
 *    unsigned char *silc_buffer_pull(SilcBuffer sb, SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Pulls current data area towards end. The length of the currently
 *    valid data area is also decremented. Returns pointer to the data
 *    area before pulling.
 *
 * EXAMPLE
 *
 *    ---------------------------------
 *    | head  | data       | tail     |
 *    ---------------------------------
 *            ^
 *            Pulls the start of the data area.
 *
 *    ---------------------------------
 *    | head     | data    | tail     |
 *    ---------------------------------
 *            ^
 ***/

static inline
unsigned char *silc_buffer_pull(SilcBuffer sb, SilcUInt32 len)
{
  unsigned char *old_data = sb->data;

#if defined(SILC_DEBUG)
  assert(len <= (SilcUInt32)(sb->tail - sb->data));
#endif

  sb->data += len;
  sb->len -= len;

  return old_data;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_push
 *
 * SYNOPSIS
 *
 *    static inline
 *    unsigned char *silc_buffer_push(SilcBuffer sb, SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Pushes current data area towards beginning. Length of the currently
 *    valid data area is also incremented. Returns a pointer to the 
 *    data area before pushing. 
 *
 * EXAMPLE
 *
 *    ---------------------------------
 *    | head     | data    | tail     |
 *    ---------------------------------
 *               ^
 *               Pushes the start of the data area.
 *
 *    ---------------------------------
 *    | head  | data       | tail     |
 *    ---------------------------------
 *               ^
 *
 ***/

static inline
unsigned char *silc_buffer_push(SilcBuffer sb, SilcUInt32 len)
{
  unsigned char *old_data = sb->data;

#if defined(SILC_DEBUG)
  assert((sb->data - len) >= sb->head);
#endif

  sb->data -= len;
  sb->len += len;

  return old_data;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_pull_tail
 *
 * SYNOPSIS
 *
 *    static inline 
 *    unsigned char *silc_buffer_pull_tail(SilcBuffer sb, SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Pulls current tail section towards end. Length of the current valid
 *    data area is also incremented. Returns a pointer to the data area 
 *    before pulling.
 *
 * EXAMPLE
 *
 *    ---------------------------------
 *    | head  | data       | tail     |
 *    ---------------------------------
 *                         ^
 *                         Pulls the start of the tail section.
 *
 *    ---------------------------------
 *    | head  | data           | tail |
 *    ---------------------------------
 *                         ^
 *
 ***/

static inline
unsigned char *silc_buffer_pull_tail(SilcBuffer sb, SilcUInt32 len)
{
  unsigned char *old_tail = sb->tail;

#if defined(SILC_DEBUG)
  assert((SilcUInt32)(sb->end - sb->tail) >= len);
#endif

  sb->tail += len;
  sb->len += len;

  return old_tail;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_push_tail
 *
 * SYNOPSIS
 *
 *    static inline
 *    unsigned char *silc_buffer_push_tail(SilcBuffer sb, SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Pushes current tail section towards beginning. Length of the current
 *    valid data area is also decremented. Returns a pointer to the
 *    tail section before pushing.
 *
 * EXAMPLE
 *
 *    ---------------------------------
 *    | head  | data           | tail |
 *    ---------------------------------
 *                             ^
 *                             Pushes the start of the tail section.
 *
 *    ---------------------------------
 *    | head  | data       | tail     |
 *    ---------------------------------
 *                             ^
 *
 ***/

static inline
unsigned char *silc_buffer_push_tail(SilcBuffer sb, SilcUInt32 len)
{
  unsigned char *old_tail = sb->tail;

#if defined(SILC_DEBUG)
  assert((sb->tail - len) >= sb->data);
#endif

  sb->tail -= len;
  sb->len -= len;

  return old_tail;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_put_head
 *
 * SYNOPSIS
 *
 *    static inline
 *    unsigned char *silc_buffer_put_head(SilcBuffer sb, 
 *					  const unsigned char *data,
 *					  SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Puts data at the head of the buffer. Returns pointer to the copied
 *    data area. 
 *
 * EXAMPLE
 *
 *    ---------------------------------
 *    | head  | data       | tail     |
 *    ---------------------------------
 *    ^
 *    Puts data to the head section. 
 *
 ***/

static inline
unsigned char *silc_buffer_put_head(SilcBuffer sb,
				    const unsigned char *data,
				    SilcUInt32 len)
{
#if defined(SILC_DEBUG)
  assert((SilcUInt32)(sb->data - sb->head) >= len);
#endif
  return (unsigned char *)memcpy(sb->head, data, len);
}

/****f* silcutil/SilcBufferAPI/silc_buffer_put
 *
 * SYNOPSIS
 *
 *    static inline
 *    unsigned char *silc_buffer_put(SilcBuffer sb,
 *				     const unsigned char *data,
 *				     SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Puts data at the start of the valid data area. Returns a pointer
 *    to the copied data area.
 *
 * EXAMPLE
 *
 *    ---------------------------------
 *    | head  | data       | tail     |
 *    ---------------------------------
 *            ^
 *            Puts data to the data section.
 *
 ***/

static inline
unsigned char *silc_buffer_put(SilcBuffer sb,
			       const unsigned char *data,
			       SilcUInt32 len)
{
#if defined(SILC_DEBUG)
  assert((SilcUInt32)(sb->tail - sb->data) >= len);
#endif
  return (unsigned char *)memcpy(sb->data, data, len);
}

/****f* silcutil/SilcBufferAPI/silc_buffer_put_tail
 *
 * SYNOPSIS
 *
 *    static inline
 *    unsigned char *silc_buffer_put_tail(SilcBuffer sb,
 *					  const unsigned char *data,
 *					  SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Puts data at the tail of the buffer. Returns pointer to the copied
 *    data area. 
 *
 * EXAMPLE
 *
 *    ---------------------------------
 *    | head  | data           | tail |
 *    ---------------------------------
 *                             ^
 * 			       Puts data to the tail section.
 *
 ***/

static inline
unsigned char *silc_buffer_put_tail(SilcBuffer sb,
				    const unsigned char *data,
				    SilcUInt32 len)
{
#if defined(SILC_DEBUG)
  assert((SilcUInt32)(sb->end - sb->tail) >= len);
#endif
  return (unsigned char *)memcpy(sb->tail, data, len);
}

/****f* silcutil/SilcBufferAPI/silc_buffer_alloc_size
 *
 * SYNOPSIS
 *
 *    static inline
 *    SilcBuffer silc_buffer_alloc_size(SilcUInt32 len);
 *
 * DESCRIPTION
 *
 *    Allocates `len' bytes size buffer and moves the tail area automatically
 *    `len' bytes so that the buffer is ready to use without calling the
 *    silc_buffer_pull_tail.
 *
 ***/

static inline
SilcBuffer silc_buffer_alloc_size(SilcUInt32 len)
{
  SilcBuffer sb = silc_buffer_alloc(len);
  if (!sb)
    return NULL;
  silc_buffer_pull_tail(sb, len);
  return sb;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_clear
 *
 * SYNOPSIS
 *
 *    static inline
 *    void silc_buffer_clear(SilcBuffer sb);
 *
 * DESCRIPTION
 *
 *    Clears and initialiazes the buffer to the state as if it was just
 *    allocated by silc_buffer_alloc.
 *
 ***/

static inline
void silc_buffer_clear(SilcBuffer sb)
{
  if (!sb)
    return;
  memset(sb->head, 0, sb->truelen);
  sb->data = sb->head;
  sb->tail = sb->head;
  sb->len = 0;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_copy
 *
 * SYNOPSIS
 *
 *    static inline
 *    SilcBuffer silc_buffer_copy(SilcBuffer sb);
 *
 * DESCRIPTION
 *
 *    Generates copy of a SilcBuffer. This copies everything inside the
 *    currently valid data area, nothing more. Use silc_buffer_clone to
 *    copy entire buffer.
 *
 ***/

static inline
SilcBuffer silc_buffer_copy(SilcBuffer sb)
{
  SilcBuffer sb_new;

  sb_new = silc_buffer_alloc_size(sb->len);
  if (!sb_new)
    return NULL;
  silc_buffer_put(sb_new, sb->data, sb->len);

  return sb_new;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_clone
 *
 * SYNOPSIS
 *
 *    static inline
 *    SilcBuffer silc_buffer_clone(SilcBuffer sb);
 *
 * DESCRIPTION
 *
 *    Clones SilcBuffer. This generates new SilcBuffer and copies
 *    everything from the source buffer. The result is exact clone of
 *    the original buffer.
 *
 ***/

static inline
SilcBuffer silc_buffer_clone(SilcBuffer sb)
{
  SilcBuffer sb_new;

  sb_new = silc_buffer_alloc_size(sb->truelen);
  if (!sb_new)
    return NULL;
  silc_buffer_put(sb_new, sb->head, sb->truelen);
  sb_new->data = sb_new->head + (sb->data - sb->head);
  sb_new->tail = sb_new->data + sb->len;
  sb_new->len = sb->len;

  return sb_new;
}

/****f* silcutil/SilcBufferAPI/silc_buffer_realloc
 *
 * SYNOPSIS
 *
 *    static inline
 *    SilcBuffer silc_buffer_realloc(SilcBuffer sb, SilcUInt32 newsize);
 *
 * DESCRIPTION
 *
 *    Reallocates buffer. Old data is saved into the new buffer. Returns
 *    new SilcBuffer pointer. The buffer is exact clone of the old one
 *    except that there is now more space at the end of buffer.
 *
 ***/

static inline
SilcBuffer silc_buffer_realloc(SilcBuffer sb, SilcUInt32 newsize)
{
  SilcBuffer sb_new;

  if (!sb)
    return silc_buffer_alloc(newsize);

  if (newsize <= sb->truelen)
    return sb;

  sb_new = silc_buffer_alloc_size(newsize);
  if (!sb_new)
    return NULL;
  silc_buffer_put(sb_new, sb->head, sb->truelen);
  sb_new->data = sb_new->head + (sb->data - sb->head);
  sb_new->tail = sb_new->data + sb->len;
  sb_new->len = sb->len;

  silc_buffer_free(sb);

  return sb_new;
}

#endif